Не abills не выдает IP адрес (Mikrotik)

Саша · Чт окт 12, 2006 6:02 pm

Авторизация проходит, но в момент получения адреса выскакивает ошибка. Пробовал клиенту прописать адрес вручную-работает, но это не выход.В радиусе вот такое логи

rad_recv: Access-Request packet from host 10.20.3.2:1024, id=38, length=177
Service-Type = Framed-User
Framed-Protocol = PPP
NAS-Port = 23
NAS-Port-Type = Virtual
User-Name = "dolphinik"
Calling-Station-Id = "10.20.3.111"
Called-Station-Id = "10.20.3.2"
MS-CHAP-Challenge = 0x20971f98104169f15a04f8c2db67dd09
MS-CHAP2-Response = 0x0100ae291a1cae1f1563455ebcebd408026100000000000000000bda996cec3a92c3b0b90ca96a547e70c96ecd161197d303
NAS-Identifier = "MikroTik"
NAS-IP-Address = 10.20.3.2
Exec-Program: /usr/abills/libexec/rauth.pl pre_auth
Exec-Program-Wait: value-pairs: User-Password == "Wind0za"
Exec-Program: returned: 0
Exec-Program: /usr/abills/libexec/rauth.pl
rad_recv: Access-Request packet from host 10.20.3.2:1024, id=38, length=177
Discarding duplicate request from client shorrname:1024 - ID: 38 due to unfinished request 24
Character in 'C' format wrapped in pack at /usr/abills/libexec/..//Abills/DES.pm line 550.
Character in 'C' format wrapped in pack at /usr/abills/libexec/..//Abills/DES.pm line 550.
Character in 'C' format wrapped in pack at /usr/abills/libexec/..//Abills/DES.pm line 550.
Character in 'C' format wrapped in pack at /usr/abills/libexec/..//Abills/DES.pm line 550.
Character in 'C' format wrapped in pack at /usr/abills/libexec/..//Abills/DES.pm line 550.
Character in 'C' format wrapped in pack at /usr/abills/libexec/..//Abills/DES.pm line 550.
Character in 'C' format wrapped in pack at /usr/abills/libexec/..//Abills/DES.pm line 550.
Character in 'C' format wrapped in pack at /usr/abills/libexec/..//Abills/DES.pm line 550.
Character in 'C' format wrapped in pack at /usr/abills/libexec/..//Abills/DES.pm line 550.
Character in 'C' format wrapped in pack at /usr/abills/libexec/..//Abills/DES.pm line 550.
Character in 'C' format wrapped in pack at /usr/abills/libexec/..//Abills/DES.pm line 550.
Character in 'C' format wrapped in pack at /usr/abills/libexec/..//Abills/DES.pm line 550.
Character in 'C' format wrapped in pack at /usr/abills/libexec/..//Abills/DES.pm line 550.
Character in 'C' format wrapped in pack at /usr/abills/libexec/..//Abills/DES.pm line 550.
Character in 'C' format wrapped in pack at /usr/abills/libexec/..//Abills/DES.pm line 550.
Character in 'C' format wrapped in pack at /usr/abills/libexec/..//Abills/DES.pm line 550.
Character in 'C' format wrapped in pack at /usr/abills/libexec/..//Abills/DES.pm line 550.
Character in 'C' format wrapped in pack at /usr/abills/libexec/..//Abills/DES.pm line 550.
Character in 'C' format wrapped in pack at /usr/abills/libexec/..//Abills/DES.pm line 550.
Character in 'C' format wrapped in pack at /usr/abills/libexec/..//Abills/DES.pm line 550.
Exec-Program-Wait: plaintext: Session-Timeout = 20, Mikrotik-Xmit-Limit = 6291456, MS-MPPE-Encryption-Types = 0x00000006, MS-CHAP2-SUCCESS = 0x01533d46434430333342443343383738454430454332323437463645424632443030463943354144364544, MS-MPPE-Encryption-Policy = 0x00000001, Acct-Interim-Interval = 300, Framed-IP-Address = 192.168.20.2, Mikrotik-Recv-Limit = 6291456, Rate-Limit = 120k, Framed-IP-Netmask = 255.255.255.255,
Exec-Program: returned: 0
Sending Access-Accept of id 38 to 10.20.3.2 port 1024
MS-CHAP2-Success = 0x01533d46434430333342443343383738454430454332323437463645424632443030463943354144364544
MS-MPPE-Recv-Key = 0xec6c74cf275babd4e4cde3c4d2728c08
MS-MPPE-Send-Key = 0x44c2a4370a1e9851e7e595917ffe31c9
MS-MPPE-Encryption-Policy = 0x00000001
MS-MPPE-Encryption-Types = 0x00000006
rad_recv: Accounting-Request packet from host 10.20.3.2:1024, id=39, length=129
Service-Type = Framed-User
Framed-Protocol = PPP
NAS-Port = 23
NAS-Port-Type = Virtual
User-Name = "dolphinik"
Calling-Station-Id = "10.20.3.111"
Called-Station-Id = "10.20.3.2"
Acct-Session-Id = "81500000"
Framed-IP-Address = 0.0.0.0
Acct-Authentic = RADIUS
Acct-Status-Type = Start
NAS-Identifier = "MikroTik"
NAS-IP-Address = 10.20.3.2
Acct-Delay-Time = 0
Exec-Program: /usr/abills/libexec/racct.pl
Sending Accounting-Response of id 39 to 10.20.3.2 port 1024
rad_recv: Accounting-Request packet from host 10.20.3.2:1024, id=40, length=177
Service-Type = Framed-User
Framed-Protocol = PPP
NAS-Port = 23
NAS-Port-Type = Virtual
User-Name = "dolphinik"
Calling-Station-Id = "10.20.3.111"
Called-Station-Id = "10.20.3.2"
Acct-Session-Id = "81500000"
Framed-IP-Address = 0.0.0.0
Acct-Authentic = RADIUS
Acct-Session-Time = 0
Acct-Input-Octets = 110
Acct-Input-Gigawords = 0
Acct-Input-Packets = 8
Acct-Output-Octets = 98
Acct-Output-Gigawords = 0
Acct-Output-Packets = 8
Acct-Status-Type = Stop
Acct-Terminate-Cause = User-Request
NAS-Identifier = "MikroTik"
NAS-IP-Address = 10.20.3.2
Acct-Delay-Time = 0
Exec-Program: /usr/abills/libexec/racct.pl
Sending Accounting-Response of id 40 to 10.20.3.2 port 1024
+++++++++==========
В Default Profile local адрес прописан.
В чем могут быть грабли?

Чт окт 12, 2006 10:08 pm

словарь к радиусу для микротик параметров не подключон

саша · Вс окт 15, 2006 6:33 pm

подключено 2 словаря:
стандартный
микротиковский
...проблема не исчезает.где могут быть грабли?

Пн окт 16, 2006 9:14 am

внимательно смотрите вывод Radius там не подключон словарь и поэтому не доходит до секции вывода адреса

Саша · Чт окт 19, 2006 6:58 pm

Если не сложно, в каком месте лога говорится, что словарь не подключен?