кажись все настроел а вот работать чет не хочет в abills.log за всю историю знакомства с абилс в нем ничего не появлялось, В веб интерфейсе абилса ошибка / Клиенты/ Логины/ Информация/ Сервисы/ Dialup / VPN/ Ошибка/ Всего -1
хз че эт значит
когда ставлю вот этот конфиг http://abills.net.ua/wiki/doku.php?id=a ... ap_mppe:ru то радиус в режиме отладки выдает такое вот
root@ubun-desktop:/# freeradius -X
Starting - reading configuration files ...
reread_config: reading radiusd.conf
Config: including file: /etc/freeradius/proxy.conf
Config: including file: /etc/freeradius/clients.conf
Config: including file: /etc/freeradius/snmp.conf
Config: including file: /etc/freeradius/eap.conf
Config: including file: /etc/freeradius/sql.conf
main: prefix = "/usr"
main: localstatedir = "/var"
main: logdir = "/var/log/freeradius"
main: libdir = "/usr/lib/freeradius"
main: radacctdir = "/var/log/freeradius/radacct"
main: hostname_lookups = no
main: snmp = no
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 0
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_file = "/var/log/freeradius/radius.log"
main: log_auth = no
main: log_auth_badpass = no
main: log_auth_goodpass = no
main: pidfile = "/var/run/freeradius/freeradius.pid"
main: user = "freerad"
main: group = "freerad"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/usr/sbin/checkrad"
main: proxy_requests = yes
proxy: retry_delay = 5
proxy: retry_count = 3
proxy: synchronous = no
proxy: default_fallback = yes
proxy: dead_time = 120
proxy: post_proxy_authorize = no
proxy: wake_all_if_all_dead = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files: reading dictionary
read_config_files: reading naslist
Using deprecated naslist file. Support for this will go away soon.
read_config_files: reading clients
read_config_files: reading realms
radiusd: entering modules setup
Module: Library search path is /usr/lib/freeradius
Module: Loaded exec
exec: wait = yes
exec: program = "(null)"
exec: input_pairs = "request"
exec: output_pairs = "(null)"
exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
pap: encryption_scheme = "crypt"
pap: auto_header = yes
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
mschap: use_mppe = yes
mschap: require_encryption = no
mschap: require_strong = no
mschap: with_ntdomain_hack = no
mschap: passwd = "(null)"
mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded System
unix: cache = no
unix: passwd = "(null)"
unix: shadow = "/etc/shadow"
unix: group = "(null)"
unix: radwtmp = "/var/log/freeradius/radwtmp"
unix: usegroup = no
unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
eap: default_eap_type = "md5"
eap: timer_expire = 60
eap: ignore_unknown_eap_types = no
eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
gtc: challenge = "Password: "
gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
preprocess: huntgroups = "/etc/freeradius/huntgroups"
preprocess: hints = "/etc/freeradius/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
preprocess: with_alvarion_vsa_hack = no
Module: Instantiated preprocess (preprocess)
exec: wait = yes
exec: program = "/usr/abills/libexec/rauth.pl pre_auth"
exec: input_pairs = "request"
exec: output_pairs = "config"
exec: packet_type = "(null)"
Module: Instantiated exec (pre_auth)
Module: Loaded files
files: usersfile = "/etc/freeradius/users"
files: acctusersfile = "/etc/freeradius/acct_users"
files: preproxy_usersfile = "/etc/freeradius/preproxy_users"
files: compat = "no"
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded realm
realm: format = "suffix"
realm: delimiter = "@"
realm: ignore_default = no
realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded detail
detail: detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
radutmp: filename = "/var/log/freeradius/radutmp"
radutmp: username = "%{User-Name}"
radutmp: case_sensitive = yes
radutmp: check_with_nas = yes
radutmp: perm = 384
radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
exec: wait = yes
exec: program = "/usr/abills/libexec/rauth.pl post_auth"
exec: input_pairs = "request"
exec: output_pairs = "config"
exec: packet_type = "(null)"
Module: Instantiated exec (post_auth)
Listening on authentication *:1812
Listening on accounting *:1813
Ready to process requests.
rad_recv: Access-Request packet from host 127.0.0.1:60694, id=72, length=138
Service-Type = Framed-User
Framed-Protocol = PPP
User-Name = "test"
MS-CHAP-Challenge = 0x1675375fcbf74f27fccc077826551692
MS-CHAP2-Response = 0x9800ed289b6d0223f56d225657e37130b7850000000000000000452b4bb3d9ad478e1e03a174b756f8957ac60c252462ae33
Calling-Station-Id = "0.01"
NAS-IP-Address = 127.0.0.1
NAS-Port = 1
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
Can't locate Digest/MD4.pm in @INC (@INC contains: /usr/abills/libexec/../ /usr/abills/libexec/../Abills/mysql /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /usr/abills/libexec/..//Abills/MSCHAP.pm line 14.
BEGIN failed--compilation aborted at /usr/abills/libexec/..//Abills/MSCHAP.pm line 14.
Compilation failed in require at /usr/abills/libexec/../Abills/mysql/Auth.pm line 1341.
BEGIN failed--compilation aborted at /usr/abills/libexec/../Abills/mysql/Auth.pm line 1341.
Compilation failed in require at /usr/abills/libexec/rauth.pl line 31.
Exec-Program output:
Exec-Program: returned: 2
rlm_exec (pre_auth): External script failed
modcall[authorize]: module "pre_auth" returns fail for request 0
modcall: leaving group authorize (returns fail) for request 0
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 72 with timestamp 49ad7dd4
Nothing to do. Sleeping until we see a request.
а сли в файле /etc/freeradius/radiusd.conf закоментировать chap и mschap ну и все что относится к http://abills.net.ua/wiki/doku.php?id=a ... ap_mppe:ru то радиус выдает следущее
root@ubun-desktop:~# freeradius -X
Starting - reading configuration files ...
reread_config: reading radiusd.conf
Config: including file: /etc/freeradius/proxy.conf
Config: including file: /etc/freeradius/clients.conf
Config: including file: /etc/freeradius/snmp.conf
Config: including file: /etc/freeradius/eap.conf
Config: including file: /etc/freeradius/sql.conf
main: prefix = "/usr"
main: localstatedir = "/var"
main: logdir = "/var/log/freeradius"
main: libdir = "/usr/lib/freeradius"
main: radacctdir = "/var/log/freeradius/radacct"
main: hostname_lookups = no
main: snmp = no
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 0
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_file = "/var/log/freeradius/radius.log"
main: log_auth = no
main: log_auth_badpass = no
main: log_auth_goodpass = no
main: pidfile = "/var/run/freeradius/freeradius.pid"
main: user = "freerad"
main: group = "freerad"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/usr/sbin/checkrad"
main: proxy_requests = yes
proxy: retry_delay = 5
proxy: retry_count = 3
proxy: synchronous = no
proxy: default_fallback = yes
proxy: dead_time = 120
proxy: post_proxy_authorize = no
proxy: wake_all_if_all_dead = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files: reading dictionary
read_config_files: reading naslist
Using deprecated naslist file. Support for this will go away soon.
read_config_files: reading clients
read_config_files: reading realms
radiusd: entering modules setup
Module: Library search path is /usr/lib/freeradius
Module: Loaded exec
exec: wait = yes
exec: program = "(null)"
exec: input_pairs = "request"
exec: output_pairs = "(null)"
exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
pap: encryption_scheme = "crypt"
pap: auto_header = yes
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
mschap: use_mppe = yes
mschap: require_encryption = no
mschap: require_strong = no
mschap: with_ntdomain_hack = no
mschap: passwd = "(null)"
mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded System
unix: cache = no
unix: passwd = "(null)"
unix: shadow = "/etc/shadow"
unix: group = "(null)"
unix: radwtmp = "/var/log/freeradius/radwtmp"
unix: usegroup = no
unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
eap: default_eap_type = "md5"
eap: timer_expire = 60
eap: ignore_unknown_eap_types = no
eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
gtc: challenge = "Password: "
gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
preprocess: huntgroups = "/etc/freeradius/huntgroups"
preprocess: hints = "/etc/freeradius/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
preprocess: with_alvarion_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded files
files: usersfile = "/etc/freeradius/users"
files: acctusersfile = "/etc/freeradius/acct_users"
files: preproxy_usersfile = "/etc/freeradius/preproxy_users"
files: compat = "no"
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded realm
realm: format = "suffix"
realm: delimiter = "@"
realm: ignore_default = no
realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded detail
detail: detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
radutmp: filename = "/var/log/freeradius/radutmp"
radutmp: username = "%{User-Name}"
radutmp: case_sensitive = yes
radutmp: check_with_nas = yes
radutmp: perm = 384
radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Listening on authentication *:1812
Listening on accounting *:1813
Ready to process requests.
rad_recv: Access-Request packet from host 127.0.0.1:42115, id=196, length=133
Service-Type = Framed-User
Framed-Protocol = PPP
User-Name = "lucky"
MS-CHAP-Challenge = 0x262642ccb220f79f9d6f55ededbc69aa
MS-CHAP2-Response = 0xc30086e3a3180c0f8cd4967ec18784af576c0000000000000000da04213d9a1c2a66ad4b745b83c16453b286f29a45a7d5ea
NAS-IP-Address = 127.0.0.1
NAS-Port = 1
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
users: Matched entry DEFAULT at line 153
users: Matched entry DEFAULT at line 172
users: Matched entry DEFAULT at line 184
modcall[authorize]: module "files" returns ok for request 0
modcall: leaving group authorize (returns ok) for request 0
rad_check_password: Found Auth-Type System
auth: type "System"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
rlm_unix: Attribute "User-Password" is required for authentication.
modcall[authenticate]: module "unix" returns invalid for request 0
modcall: leaving group authenticate (returns invalid) for request 0
auth: Failed to validate the user.
Delaying request 0 for 1 seconds
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Sending Access-Reject of id 196 to 127.0.0.1 port 42115
Waking up in 4 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 196 with timestamp 49ad8400
Nothing to do. Sleeping until we see a request.
хочу добавить что радтеста еще ниразу не проходил удачно)
а логи абилса молчат и еще заметил 1 неприятность когда инсталировал cpan> install Time::HiRes набросало ошибок ппц
Running install for module Time::HiRes
Running make for J/JH/JHI/Time-HiRes-1.9719.tar.gz
Fetching with LWP:
ftp://ftp.gafol.net/pub/cpan/authors/id ... 719.tar.gz
Fetching with LWP:
ftp://ftp.gafol.net/pub/cpan/authors/id ... /CHECKSUMS
Checksum for /root/.cpan/sources/authors/id/J/JH/JHI/Time-HiRes-1.9719.tar.gz ok
Time-HiRes-1.9719/
Time-HiRes-1.9719/Changes
Time-HiRes-1.9719/fallback/
Time-HiRes-1.9719/fallback/const-c.inc
Time-HiRes-1.9719/fallback/const-xs.inc
Time-HiRes-1.9719/hints/
Time-HiRes-1.9719/hints/aix.pl
Time-HiRes-1.9719/hints/dec_osf.pl
Time-HiRes-1.9719/hints/dynixptx.pl
Time-HiRes-1.9719/hints/irix.pl
Time-HiRes-1.9719/hints/linux.pl
Time-HiRes-1.9719/hints/sco.pl
Time-HiRes-1.9719/hints/solaris.pl
Time-HiRes-1.9719/hints/svr4.pl
Time-HiRes-1.9719/HiRes.pm
Time-HiRes-1.9719/HiRes.xs
Time-HiRes-1.9719/Makefile.PL
Time-HiRes-1.9719/MANIFEST
Time-HiRes-1.9719/META.yml
Time-HiRes-1.9719/ppport.h
Time-HiRes-1.9719/README
Time-HiRes-1.9719/t/
Time-HiRes-1.9719/t/HiRes.t
Time-HiRes-1.9719/TODO
Time-HiRes-1.9719/typemap
CPAN.pm: Going to build J/JH/JHI/Time-HiRes-1.9719.tar.gz
Configuring Time::HiRes...
Using hints hints/linux.pl...
Extra libraries: -lrt...
Have syscall()... looking for syscall.h... NOT found.
Looking for gettimeofday()... found.
Looking for setitimer()... found.
Looking for getitimer()... found.
You have interval timers (both setitimer and getitimer).
Looking for ualarm()... NOT found.
But you have setitimer().
We can make a Time::HiRes::ualarm().
Looking for usleep()... found.
Looking for nanosleep()... testing... NOT found.
You cannot mix subsecond sleeps with signals.
(It would not be portable anyway.)
Looking for clock_gettime()... NOT found.
Looking for clock_getres()... NOT found.
Looking for clock_nanosleep()... NOT found.
Looking for clock()... NOT found.
Looking for stat() subsecond timestamps...
Trying struct stat st_atimespec.tv_nsec...NOT found.
Trying struct stat st_atimensec...NOT found.
Trying struct stat st_atime_n...NOT found.
Trying struct stat st_atim.tv_nsec...NOT found.
Trying struct stat st_uatime...NOT found.
You do not seem to have stat subsecond timestamps.
Checking if your kit is complete...
Looks good
Processing hints file hints/linux.pl
Writing Makefile for Time::HiRes
Now you may issue 'make'. Do not forget also 'make test'.
cp HiRes.pm blib/lib/Time/HiRes.pm
/usr/bin/perl /usr/share/perl/5.8/ExtUtils/xsubpp -typemap /usr/share/perl/5.8/ExtUtils/typemap -typemap typemap HiRes.xs > HiRes.xsc && mv HiRes.xsc HiRes.c
cc -c -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBIAN -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"1.9719\" -DXS_VERSION=\"1.9719\" -fPIC "-I/usr/lib/perl/5.8/CORE" -DATLEASTFIVEOHOHFIVE HiRes.c
In file included from HiRes.xs:17:
/usr/lib/perl/5.8/CORE/perl.h:420:24: error: sys/types.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:451:19: error: ctype.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:463:23: error: locale.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:480:20: error: setjmp.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:486:26: error: sys/param.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:491:23: error: stdlib.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:496:23: error: unistd.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:776:23: error: string.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:925:27: error: netinet/in.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:929:26: error: arpa/inet.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:939:25: error: sys/stat.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:961:21: error: time.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:968:25: error: sys/time.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:975:27: error: sys/times.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:982:19: error: errno.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:997:25: error: sys/socket.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:1024:21: error: netdb.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:1127:24: error: sys/ioctl.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:1156:23: error: dirent.h: No such file or directory
In file included from /usr/lib/gcc/i486-linux-gnu/4.2.3/include/syslimits.h:7,
from /usr/lib/gcc/i486-linux-gnu/4.2.3/include/limits.h:11,
from /usr/lib/perl/5.8/CORE/perl.h:1510,
from HiRes.xs:17:
/usr/lib/gcc/i486-linux-gnu/4.2.3/include/limits.h:122:61: error: limits.h: No such file or directory
In file included from /usr/lib/perl/5.8/CORE/perl.h:2120,
from HiRes.xs:17:
/usr/lib/perl/5.8/CORE/handy.h:136:25: error: inttypes.h: No such file or directory
In file included from /usr/lib/perl/5.8/CORE/perl.h:2284,
from HiRes.xs:17:
/usr/lib/perl/5.8/CORE/unixish.h:106:21: error: signal.h: No such file or directory
In file included from HiRes.xs:17:
/usr/lib/perl/5.8/CORE/perl.h:2421:33: error: pthread.h: No such file or directory
In file included from HiRes.xs:17:
/usr/lib/perl/5.8/CORE/perl.h:2423: error: expected ?=?, ?,?, ?;?, ?asm? or ?__attribute__? before ?perl_os_thread?
/usr/lib/perl/5.8/CORE/perl.h:2424: error: expected ?=?, ?,?, ?;?, ?asm? or ?__attribute__? before ?perl_mutex?
/usr/lib/perl/5.8/CORE/perl.h:2425: error: expected ?=?, ?,?, ?;?, ?asm? or ?__attribute__? before ?perl_cond?
/usr/lib/perl/5.8/CORE/perl.h:2426: error: expected ?=?, ?,?, ?;?, ?asm? or ?__attribute__? before ?perl_key?
In file included from /usr/lib/perl/5.8/CORE/iperlsys.h:51,
from /usr/lib/perl/5.8/CORE/perl.h:2733,
from HiRes.xs:17:
/usr/lib/perl/5.8/CORE/perlio.h:65:19: error: stdio.h: No such file or directory
In file included from /usr/lib/perl/5.8/CORE/iperlsys.h:51,
from /usr/lib/perl/5.8/CORE/perl.h:2733,
from HiRes.xs:17:
/usr/lib/perl/5.8/CORE/perlio.h:259: error: expected ?)? before ?*? token
/usr/lib/perl/5.8/CORE/perlio.h:262: error: expected ?=?, ?,?, ?;?, ?asm? or ?__attribute__? before ?*? token
/usr/lib/perl/5.8/CORE/perlio.h:265: error: expected ?=?, ?,?, ?;?, ?asm? or ?__attribute__? before ?*? token
/usr/lib/perl/5.8/CORE/perlio.h:268: error: expected declaration specifiers or ?...? before ?FILE?
In file included from /usr/lib/perl/5.8/CORE/perl.h:2747,
from HiRes.xs:17:
/usr/lib/perl/5.8/CORE/sv.h:389: error: expected specifier-qualifier-list before ?DIR?
In file included from /usr/lib/perl/5.8/CORE/op.h:497,
from /usr/lib/perl/5.8/CORE/perl.h:2754,
from HiRes.xs:17:
/usr/lib/perl/5.8/CORE/reentr.h:72:20: error: pwd.h: No such file or directory
/usr/lib/perl/5.8/CORE/reentr.h:75:20: error: grp.h: No such file or directory
/usr/lib/perl/5.8/CORE/reentr.h:85:26: error: crypt.h: No such file or directory
/usr/lib/perl/5.8/CORE/reentr.h:90:27: error: shadow.h: No such file or directory
In file included from /usr/lib/perl/5.8/CORE/op.h:497,
from /usr/lib/perl/5.8/CORE/perl.h:2754,
from HiRes.xs:17:
/usr/lib/perl/5.8/CORE/reentr.h:612: error: field ?_crypt_struct? has incomplete type
/usr/lib/perl/5.8/CORE/reentr.h:620: error: field ?_drand48_struct? has incomplete type
/usr/lib/perl/5.8/CORE/reentr.h:624: error: field ?_grent_struct? has incomplete type
/usr/lib/perl/5.8/CORE/reentr.h:635: error: field ?_hostent_struct? has incomplete type
/usr/lib/perl/5.8/CORE/reentr.h:654: error: field ?_netent_struct? has incomplete type
/usr/lib/perl/5.8/CORE/reentr.h:669: error: field ?_protoent_struct? has incomplete type
/usr/lib/perl/5.8/CORE/reentr.h:684: error: field ?_pwent_struct? has incomplete type
/usr/lib/perl/5.8/CORE/reentr.h:695: error: field ?_servent_struct? has incomplete type
/usr/lib/perl/5.8/CORE/reentr.h:710: error: field ?_spent_struct? has incomplete type
/usr/lib/perl/5.8/CORE/reentr.h:721: error: field ?_gmtime_struct? has incomplete type
/usr/lib/perl/5.8/CORE/reentr.h:724: error: field ?_localtime_struct? has incomplete type
/usr/lib/perl/5.8/CORE/reentr.h:771: error: field ?_random_struct? has incomplete type
/usr/lib/perl/5.8/CORE/reentr.h:772: error: expected specifier-qualifier-list before ?int32_t?
In file included from /usr/lib/perl/5.8/CORE/perl.h:2756,
from HiRes.xs:17:
/usr/lib/perl/5.8/CORE/av.h:13: error: expected specifier-qualifier-list before ?ssize_t?
In file included from /usr/lib/perl/5.8/CORE/perl.h:2759,
from HiRes.xs:17:
/usr/lib/perl/5.8/CORE/scope.h:232: error: expected specifier-qualifier-list before ?sigjmp_buf?
In file included from HiRes.xs:17:
/usr/lib/perl/5.8/CORE/perl.h:2931: error: expected ?=?, ?,?, ?;?, ?asm? or ?__attribute__? before ?getuid?
/usr/lib/perl/5.8/CORE/perl.h:2932: error: expected ?=?, ?,?, ?;?, ?asm? or ?__attribute__? before ?geteuid?
/usr/lib/perl/5.8/CORE/perl.h:2933: error: expected ?=?, ?,?, ?;?, ?asm? or ?__attribute__? before ?getgid?
/usr/lib/perl/5.8/CORE/perl.h:2934: error: expected ?=?, ?,?, ?;?, ?asm? or ?__attribute__? before ?getegid?
In file included from HiRes.xs:17:
/usr/lib/perl/5.8/CORE/perl.h:3238:22: error: math.h: No such file or directory
In file included from /usr/lib/perl/5.8/CORE/perl.h:3881,
from HiRes.xs:17:
/usr/lib/perl/5.8/CORE/thrdvar.h:85: error: field ?Tstatbuf? has incomplete type
/usr/lib/perl/5.8/CORE/thrdvar.h:86: error: field ?Tstatcache? has incomplete type
/usr/lib/perl/5.8/CORE/thrdvar.h:91: error: field ?Ttimesbuf? has incomplete type
In file included from /usr/lib/perl/5.8/CORE/perl.h:3883,
from HiRes.xs:17:
/usr/lib/perl/5.8/CORE/intrpvar.h:66: error: expected specifier-qualifier-list before ?time_t?
In file included from /usr/lib/perl/5.8/CORE/perl.h:3950,
from HiRes.xs:17:
/usr/lib/perl/5.8/CORE/proto.h:128: error: expected declaration specifiers or ?...? before ?mode_t?
/usr/lib/perl/5.8/CORE/proto.h:128: error: expected declaration specifiers or ?...? before ?uid_t?
/usr/lib/perl/5.8/CORE/proto.h:297: error: expected declaration specifiers or ?...? before ?off64_t?
/usr/lib/perl/5.8/CORE/proto.h:299: error: expected ?=?, ?,?, ?;?, ?asm? or ?__attribute__? before ?Perl_do_sysseek?
/usr/lib/perl/5.8/CORE/proto.h:300: error: expected ?=?, ?,?, ?;?, ?asm? or ?__attribute__? before ?Perl_do_tell?
/usr/lib/perl/5.8/CORE/proto.h:411: error: expected declaration specifiers or ?...? before ?gid_t?
/usr/lib/perl/5.8/CORE/proto.h:411: error: expected declaration specifiers or ?...? before ?uid_t?
/usr/lib/perl/5.8/CORE/proto.h:736: error: expected ?=?, ?,?, ?;?, ?asm? or ?__attribute__? before ?Perl_my_fork?
/usr/lib/perl/5.8/CORE/proto.h:1020: error: expected declaration specifiers or ?...? before ?pid_t?
/usr/lib/perl/5.8/CORE/proto.h:1300: error: expected declaration specifiers or ?...? before ?pid_t?
/usr/lib/perl/5.8/CORE/proto.h:1456: error: expected ?=?, ?,?, ?;?, ?asm? or ?__attribute__? before ?*? token
/usr/lib/perl/5.8/CORE/proto.h:2001: error: expected ?=?, ?,?, ?;?, ?asm? or ?__attribute__? before ?Perl_PerlIO_read?
/usr/lib/perl/5.8/CORE/proto.h:2002: error: expected ?=?, ?,?, ?;?, ?asm? or ?__attribute__? before ?Perl_PerlIO_write?
/usr/lib/perl/5.8/CORE/proto.h:2003: error: expected ?=?, ?,?, ?;?, ?asm? or ?__attribute__? before ?Perl_PerlIO_unread?
/usr/lib/perl/5.8/CORE/proto.h:2004: error: expected ?=?, ?,?, ?;?, ?asm? or ?__attribute__? before ?Perl_PerlIO_tell?
/usr/lib/perl/5.8/CORE/proto.h:2005: error: expected declaration specifiers or ?...? before ?off64_t?
In file included from /usr/lib/perl/5.8/CORE/perl.h:3988,
from HiRes.xs:17:
/usr/lib/perl/5.8/CORE/perlvars.h:31: error: expected ?=?, ?,?, ?;?, ?asm? or ?__attribute__? before ?PL_thr_key?
/usr/lib/perl/5.8/CORE/perlvars.h:48: error: expected ?=?, ?,?, ?;?, ?asm? or ?__attribute__? before ?PL_op_mutex?
/usr/lib/perl/5.8/CORE/perlvars.h:52: error: expected ?=?, ?,?, ?;?, ?asm? or ?__attribute__? before ?PL_dollarzero_mutex?
/usr/lib/perl/5.8/CORE/perl.h:4485:24: error: sys/ipc.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:4486:24: error: sys/sem.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:4611:24: error: sys/file.h: No such file or directory
In file included from /usr/lib/perl/5.8/CORE/perlapi.h:38,
from /usr/lib/perl/5.8/CORE/XSUB.h:349,
from HiRes.xs:18:
/usr/lib/perl/5.8/CORE/intrpvar.h:66: error: expected ?=?, ?,?, ?;?, ?asm? or ?__attribute__? before ?*? token
/usr/lib/perl/5.8/CORE/intrpvar.h:237: error: expected ?=?, ?,?, ?;?, ?asm? or ?__attribute__? before ?*? token
/usr/lib/perl/5.8/CORE/intrpvar.h:238: error: expected ?=?, ?,?, ?;?, ?asm? or ?__attribute__? before ?*? token
/usr/lib/perl/5.8/CORE/intrpvar.h:239: error: expected ?=?, ?,?, ?;?, ?asm? or ?__attribute__? before ?*? token
/usr/lib/perl/5.8/CORE/intrpvar.h:240: error: expected ?=?, ?,?, ?;?, ?asm? or ?__attribute__? before ?*? token
In file included from /usr/lib/perl/5.8/CORE/perlapi.h:39,
from /usr/lib/perl/5.8/CORE/XSUB.h:349,
from HiRes.xs:18:
/usr/lib/perl/5.8/CORE/perlvars.h:31: error: expected ?=?, ?,?, ?;?, ?asm? or ?__attribute__? before ?*? token
/usr/lib/perl/5.8/CORE/perlvars.h:48: error: expected ?=?, ?,?, ?;?, ?asm? or ?__attribute__? before ?*? token
/usr/lib/perl/5.8/CORE/perlvars.h:52: error: expected ?=?, ?,?, ?;?, ?asm? or ?__attribute__? before ?*? token
HiRes.xs:31:26: error: sys/select.h: No such file or directory
HiRes.xs: In function ?myU2time?:
HiRes.xs:696: error: storage size of ?Tp? isn?t known
HiRes.xs: In function ?myNVtime?:
HiRes.xs:710: error: storage size of ?Tp? isn?t known
HiRes.xs: In function ?hrstatns?:
HiRes.xs:721: error: invalid type argument of ?unary *?
HiRes.xs: In function ?XS_Time__HiRes_usleep?:
HiRes.xs:792: error: storage size of ?Ta? isn?t known
HiRes.xs:792: error: storage size of ?Tb? isn?t known
HiRes.xs: In function ?XS_Time__HiRes_sleep?:
HiRes.xs:859: error: storage size of ?Ta? isn?t known
HiRes.xs:859: error: storage size of ?Tb? isn?t known
HiRes.xs: In function ?XS_Time__HiRes_gettimeofday?:
HiRes.xs:1025: error: storage size of ?Tp? isn?t known
HiRes.xs: In function ?XS_Time__HiRes_time?:
HiRes.xs:1043: error: storage size of ?Tp? isn?t known
HiRes.xs: In function ?XS_Time__HiRes_setitimer?:
HiRes.xs:1068: error: storage size of ?newit? isn?t known
HiRes.xs:1069: error: storage size of ?oldit? isn?t known
HiRes.xs: In function ?XS_Time__HiRes_getitimer?:
HiRes.xs:1092: error: storage size of ?nowit? isn?t known
make: *** [HiRes.o] Error 1
/usr/bin/make -- NOT OK
Running make test
Can't test without successful make
Running make install
make had returned bad status, install seems impossible
извините пожалуста если не грамотно описал траблу так как я в этом деле не очень силен ОС Ubuntu 8.04 если еще какие логи надо пишите,
Помогите плз чайнику ато юзер гейт уже напряг до такой степени что в никс полез)