Linux accel-ppp

Debian: сборка и установка

Требования:

Современный дистрибутив Linux
Ядро версии 2.6.25 или старше
cmake не младше версии 2.6
libcrypto-0.9.8 или старше (openssl-0.9.8)
libpcre
net-snmp-5.x (Для snmp)
liblua5.1 (для IPoE c DHCP option 82)

High performance PPTP/L2TP/PPPoE server for Linux.

Abills

Меню Настройка>Сервер доступа

Alive:	Время между RADIUS Alive пакетами. Рекомендуется 300
Type:	Linux accel-ppp
IP:PORT:	Ип адрес и порт сервера. Порт по умолчанию 3799 и 2001 для telnet. (127.0.0.1:3799:2001)
Password:	Пароль для Disconnect Message указывается в параметре конфигурационного файла /etc/accel-ppp.conf, также этот пароль используется как RADIUS secret

Проверка скорости и переконфигурация шейперов

Показать текущую скорость

/usr/abills/libexec/billd checkspeed accel_ppp=1 SHOW_SPEED=1

Переконфигурировать шейпера

/usr/abills/libexec/billd checkspeed accel_ppp=1

Синхронизация активных сессий

Система проверяет онлайн сессии в биллинге и поднятые на accel-ppp

/usr/abills/libexec/billd check_accel_ppp=1

Создаем vlan интерфейсы

Добавление vlan в Ubuntu

Установка и настройка accel-ppp

Ubuntu

Что нужно:

Ядро 2.36 и выше
Для шейпера нужен libnl2 или libnl3

wget http://sourceforge.net/projects/accel-ppp/files/accel-ppp-1.5.0.tar.bz2
tar -xjf accel-ppp-1.5.0.tar.bz2
mkdir accel-ppp-build
cd accel-ppp-build
cmake -DCMAKE_INSTALL_PREFIX=/usr/local -DRADIUS=TRUE -DSHAPER=TRUE ../accel-ppp-1.5.0
make
make install

Настройка accel-ppp

/etc/accel-ppp.conf

[modules]
#path=/usr/local/lib/accel-ppp
log_file
#log_tcp
#log_pgsql
pptp
pppoe
#l2tp
auth_mschap_v2
#auth_mschap_v1
#auth_chap_md5
#auth_pap
radius
#ippool
sigchld
pppd_compat
shaper
#chap-secrets

[core]
log-error=/var/log/accel-ppp/core.log
thread-count=4

[ppp]
verbose=1
min-mtu=1000
mtu=1492
mru=1492
#ccp=0
#sid-case=upper
#check-ip=0
#single-session=replace
#mppe=require

[lcp]
echo-interval=30
echo-failure=3

[pptp]
echo-interval=30
verbose=1

[pppoe]
# Интерфейсы на которых запущен pppoe сервер ( должны быть соответственно подняты интерфейсы)
interface=eth1
interface=vlan2
interface=vlan3
interface=vlan4
#ac-name=xxx
#service-name=yyy
#pado-delay=0
#pado-delay=0,100:100,200:200,-1:500
#ifname-in-sid=called-sid
#tr101=1
verbose=1

#[l2tp]
#dictionary=/usr/local/share/accel-ppp/l2tp/dictionary
#hello-interval=60
#timeout=60
#rtimeout=5
#retransmit=5
#host-name=accel-ppp
#verbose=1

[dns]
dns1=10.0.0.10
#dns2=172.16.1.1

[radius]
dictionary=/usr/local/share/accel-ppp/radius/dictionary
nas-identifier=accel-ppp
nas-ip-address=127.0.0.1
gw-ip-address=10.0.0.10
auth-server=127.0.0.1:1812,secretpass
acct-server=127.0.0.1:1813,secretpass
dae-server=127.0.0.1:3799,secretpass
verbose=1
#timeout=3
#max-try=3
#acct-timeout=120
#acct-delay-time=0

[client-ip-range]
10.0.0.0/8 # Указать диапазоны раздаваемые клиентам в (по DHCP или вручную). 
           # ВАЖНО: они не должны пересекатся с пулами PPPOE или PPTP сервера доступа.

#[ip-pool]
#gw-ip-address=192.168.0.1
#192.168.0.2-255
#192.168.1.1-255
#192.168.2.1-255
#192.168.3.1-255
#192.168.4.0/24

[log]
log-file=/var/log/accel-ppp/accel-ppp.log
log-emerg=/var/log/accel-ppp/emerg.log
log-fail-file=/var/log/accel-ppp/auth-fail.log
#log-debug=/dev/stdout
#log-tcp=127.0.0.1:3000
copy=1
#color=1
#per-user-dir=per_user
#per-session-dir=per_session
#per-session=1
level=3
#log-tcp=127.0.0.1:3000

#[log-pgsql]
#conninfo=user=log
#log-table=log

[pppd-compat]
#ip-pre-up=/etc/ppp/ip-pre-up
#ip-up=/etc/ppp/ip-up
#ip-down=/etc/ppp/ip-down
#ip-change=/etc/ppp/ip-change
radattr-prefix=/var/run/radattr
verbose=1

#[chap-secrets]
#gw-ip-address=192.168.100.1
#chap-secrets=/etc/ppp/chap-secrets

[[shaper] ]
#attr=Filter-Id
#down-burst-factor=0.1
#up-burst-factor=1.0
#latency=50
attr-down=PPPD-Downstream-Speed-Limit
attr-up=PPPD-Upstream-Speed-Limit


[cli]
telnet=127.0.0.1:2000
password=secretpass
tcp=127.0.0.1:2001

/usr/local/share/accel-ppp/radius/dictionary

$INCLUDE dictionary.rfc2865
$INCLUDE dictionary.rfc2866
$INCLUDE dictionary.rfc2867
$INCLUDE dictionary.rfc2868
$INCLUDE dictionary.rfc2869
$INCLUDE dictionary.rfc3576
$INCLUDE dictionary.rfc3580
$INCLUDE dictionary.rfc4072
$INCLUDE dictionary.rfc4372
$INCLUDE dictionary.rfc5176
$INCLUDE dictionary.microsoft
$INCLUDE dictionary.cisco

# Limit session traffic
ATTRIBUTE Session-Octets-Limit 227 integer
# What to assume as limit - 0 in+out, 1 in, 2 out, 3 max(in,out)
ATTRIBUTE Octets-Direction 228 integer
# Connection Speed Limit
ATTRIBUTE PPPD-Upstream-Speed-Limit 230 integer
ATTRIBUTE PPPD-Downstream-Speed-Limit 231 integer
ATTRIBUTE PPPD-Upstream-Speed-Limit-1 232 integer
ATTRIBUTE PPPD-Downstream-Speed-Limit-1 233 integer
ATTRIBUTE PPPD-Upstream-Speed-Limit-2 234 integer
ATTRIBUTE PPPD-Downstream-Speed-Limit-2 235 integer
ATTRIBUTE PPPD-Upstream-Speed-Limit-3 236 integer
ATTRIBUTE PPPD-Downstream-Speed-Limit-3 237 integer
ATTRIBUTE Acct-Interim-Interval 85 integer 
ATTRIBUTE Acct-Input-Gigawords    52      integer
ATTRIBUTE Acct-Output-Gigawords   53      integer

Отключить ip_gre

modprobe -r ip_gre
vim /etc/modprobe.d/blacklist.conf
blacklist ip_gre

Добавить в автозагрузку драйвера

vim /etc/modules
pptp
pppoe

Cоздадим скрипт для запуска-остановки accel-ppp

vim /etc/init.d/accel-ppp
chmod +x /etc/init.d/accel-ppp

#!/bin/sh
#/etc/init.d/accel-pppd: set up the accel-ppp server
### BEGIN INIT INFO
# Provides:          accel-ppp
# Required-Start:    $networking
# Required-Stop:     $networking
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
### END INIT INFO

set -e

PATH=/bin:/usr/bin:/sbin:/usr/sbin:/usr/local/sbin;
ACCEL_PPTPD=`which accel-pppd`
. /lib/lsb/init-functions

if test -f /etc/default/accel-ppp; then
    . /etc/default/accel-ppp
fi

if [ -z $ACCEL_PPPTD_OPTS ]; then
  ACCEL_PPTPD_OPTS="-c /etc/accel-ppp.conf"
fi

case "$1" in
  start)
        log_daemon_msg "Starting accel-ppp server" "accel-pppd"
        if start-stop-daemon --start --quiet --oknodo --exec $ACCEL_PPTPD -- -d -p /var/run/accel-pppd.pid $ACCEL_PPTPD_OPTS; then
            log_end_msg 0
        else
            log_end_msg 1
        fi
  ;;
  restart)
        log_daemon_msg "Restarting accel-ppp server" "accel-pppd"
        start-stop-daemon --stop --quiet --oknodo --retry 180 --pidfile /var/run/accel-pppd.pid
        if start-stop-daemon --start --quiet --oknodo --exec $ACCEL_PPTPD -- -d -p /var/run/accel-pppd.pid $ACCEL_PPTPD_OPTS; then
            log_end_msg 0
        else
            log_end_msg 1
        fi
  ;;

  stop)
        log_daemon_msg "Stopping accel-ppp server" "accel-pppd"
        start-stop-daemon --stop --quiet --oknodo --retry 180 --pidfile /var/run/accel-pppd.pid
        log_end_msg 0
  ;;

  status)
    do_status
  ;;
  *)
    log_success_msg "Usage: /etc/init.d/accel-ppp {start|stop|status|restart}"
    exit 1
    ;;
esac

exit 0

Добавляем в автозагрузку

update-rc.d accel-ppp defaults

В словарь Freeradius - raddb/dictionary добавить такие пары

# Limit session traffic
ATTRIBUTE Session-Octets-Limit 227 integer
# What to assume as limit - 0 in+out, 1 in, 2 out, 3 max(in,out)
ATTRIBUTE Octets-Direction 228 integer
# Connection Speed Limit
ATTRIBUTE PPPD-Upstream-Speed-Limit 230 integer
ATTRIBUTE PPPD-Downstream-Speed-Limit 231 integer
ATTRIBUTE PPPD-Upstream-Speed-Limit-1 232 integer
ATTRIBUTE PPPD-Downstream-Speed-Limit-1 233 integer
ATTRIBUTE PPPD-Upstream-Speed-Limit-2 234 integer
ATTRIBUTE PPPD-Downstream-Speed-Limit-2 235 integer
ATTRIBUTE PPPD-Upstream-Speed-Limit-3 236 integer
ATTRIBUTE PPPD-Downstream-Speed-Limit-3 237 integer
ATTRIBUTE Acct-Interim-Interval 85 integer 
ATTRIBUTE Acct-Input-Gigawords    52      integer
ATTRIBUTE Acct-Output-Gigawords   53      integer

CentOS

Устанавливаем файлы ядра:

yum install -y kernel-headers kernel-devel bzip2 cmake

Скачиваем и устанавливаем accel-ppp:

wget http://sourceforge.net/projects/accel-ppp/files/accel-ppp-1.7.4.tar.bz2
tar -xjf accel-ppp-1.7.4.tar.bz2
cd accel-ppp-1.7.4
mkdir build
cd build
cmake -DBUILD_DRIVER=FALSE -DRADIUS=TRUE -DKDIR=/usr/src/kernels/3.10.0-229.4.2.el7.x86_64 \
DCMAKE_INSTALL_PREFIX=/usr/local ..

Не выходя из папки build сделать:

make && make install

В файл /etc/accel-ppp.conf вставить следующее и отредактировать по ситуации:

nano /etc/accel-ppp.conf

[modules]
#path=/usr/local/lib/accel-ppp
log_file
#log_tcp
#log_pgsql
pptp
pppoe
#l2tp
auth_mschap_v2
#auth_mschap_v1
#auth_chap_md5
#auth_pap
radius
#ippool
sigchld
pppd_compat
shaper_tbf
#chap-secrets

[core]
log-error=/var/log/accel-ppp/core.log
thread-count=4

[ppp]
verbose=1
min-mtu=1000
mtu=1400
mru=1400
#ccp=0
#sid-case=upper
#check-ip=0
#single-session=replace
#mppe=require

[lcp]
echo-interval=30
echo-failure=3

[pptp]
echo-interval=30
verbose=1

[pppoe]
# Интерфейсы на которых запущен pppoe сервер ( должны быть соответственно подняты интерфейсы)
interface=eth1
interface=vlan2
interface=vlan3
interface=vlan4
#ac-name=xxx
#service-name=yyy
#pado-delay=0
#pado-delay=0,100:100,200:200,-1:500
#ifname-in-sid=called-sid
#tr101=1
verbose=1

#[l2tp]
#dictionary=/usr/local/share/accel-ppp/l2tp/dictionary
#hello-interval=60
#timeout=60
#rtimeout=5
#retransmit=5
#host-name=accel-ppp
#verbose=1

[dns]
dns1=10.0.0.10
#dns2=172.16.1.1

[radius]
dictionary=/usr/local/share/accel-ppp/radius/dictionary
nas-identifier=accel-ppp
nas-ip-address=127.0.0.1
gw-ip-address=10.0.0.10
auth-server=127.0.0.1:1812,secretpass
acct-server=127.0.0.1:1813,secretpass
dae-server=127.0.0.1:3799,secretpass
verbose=1
#timeout=3
#max-try=3
#acct-timeout=120
#acct-delay-time=0

[client-ip-range]
disable
#10.0.0.0/8 # Указать диапазоны раздаваемые клиентам в (по DHCP или вручную). 
         # ВАЖНО: они не должны пересекатся с пулами PPPOE или PPTP сервера доступа.

#[ip-pool]
#gw-ip-address=192.168.0.1
#192.168.0.2-255
#192.168.1.1-255
#192.168.2.1-255
#192.168.3.1-255
#192.168.4.0/24

[log]
log-file=/var/log/accel-ppp/accel-ppp.log
log-emerg=/var/log/accel-ppp/emerg.log
log-fail-file=/var/log/accel-ppp/auth-fail.log
#log-debug=/dev/stdout
#log-tcp=127.0.0.1:3000
copy=1
#color=1
#per-user-dir=per_user
#per-session-dir=per_session
#per-session=1
level=3
#log-tcp=127.0.0.1:3000

#[log-pgsql]
#conninfo=user=log
#log-table=log

[pppd-compat]
#ip-pre-up=/etc/ppp/ip-pre-up
#ip-up=/etc/ppp/ip-up
#ip-down=/etc/ppp/ip-down
#ip-change=/etc/ppp/ip-change
radattr-prefix=/var/run/radattr
verbose=1

#[chap-secrets]
#gw-ip-address=192.168.100.1
#chap-secrets=/etc/ppp/chap-secrets

[tbf]
#attr=Filter-Id
#down-burst-factor=0.1
#up-burst-factor=1.0
#latency=50
attr-down=PPPD-Downstream-Speed-Limit
attr-up=PPPD-Upstream-Speed-Limit


[cli]
telnet=127.0.0.1:2000
#tcp=127.0.0.1:2001
#пароль такой же как на RADIUS COA
password=secretpass

В конец файла /usr/local/share/accel-ppp/radius/dictionary добавить:

# nano /usr/local/share/accel-ppp/radius/dictionary

# Limit session traffic
ATTRIBUTE Session-Octets-Limit 227 integer
# What to assume as limit - 0 in+out, 1 in, 2 out, 3 max(in,out)
ATTRIBUTE Octets-Direction 228 integer
# Connection Speed Limit
ATTRIBUTE PPPD-Upstream-Speed-Limit 230 integer
ATTRIBUTE PPPD-Downstream-Speed-Limit 231 integer
ATTRIBUTE PPPD-Upstream-Speed-Limit-1 232 integer
ATTRIBUTE PPPD-Downstream-Speed-Limit-1 233 integer
ATTRIBUTE PPPD-Upstream-Speed-Limit-2 234 integer
ATTRIBUTE PPPD-Downstream-Speed-Limit-2 235 integer
ATTRIBUTE PPPD-Upstream-Speed-Limit-3 236 integer
ATTRIBUTE PPPD-Downstream-Speed-Limit-3 237 integer
ATTRIBUTE Acct-Interim-Interval 85 integer 
ATTRIBUTE Acct-Input-Gigawords    52      integer
ATTRIBUTE Acct-Output-Gigawords   53      integer

Отключить ip_gre:

modprobe -r ip_gre

И в файл /etc/modprobe.d/blacklist.conf добавить:

nano /etc/modprobe.d/blacklist.conf

blacklist ip_gre

В файл /etc/modules внести:

nano /etc/modules

pptp
pppoe

В словарь Freeradius - raddb/dictionary добавить такие пары:

cd /usr/local/freeradius/etc/raddb
nano dictionary

# Limit session traffic
ATTRIBUTE Session-Octets-Limit 227 integer
# What to assume as limit - 0 in+out, 1 in, 2 out, 3 max(in,out)
ATTRIBUTE Octets-Direction 228 integer
# Connection Speed Limit
ATTRIBUTE PPPD-Upstream-Speed-Limit 230 integer
ATTRIBUTE PPPD-Downstream-Speed-Limit 231 integer
ATTRIBUTE PPPD-Upstream-Speed-Limit-1 232 integer
ATTRIBUTE PPPD-Downstream-Speed-Limit-1 233 integer
ATTRIBUTE PPPD-Upstream-Speed-Limit-2 234 integer
ATTRIBUTE PPPD-Downstream-Speed-Limit-2 235 integer
ATTRIBUTE PPPD-Upstream-Speed-Limit-3 236 integer
ATTRIBUTE PPPD-Downstream-Speed-Limit-3 237 integer
ATTRIBUTE Acct-Interim-Interval 85 integer 
ATTRIBUTE Acct-Input-Gigawords    52      integer

Запустить accel-ppp:

accel-pppd  -p 'var/run/accel.pid' -c '/etc/accel-ppp.conf'

Debian 8

Обновляем пакеты:

apt-get update

Устанавливаем нужные пакеты:

cd /usr/src/
apt-get install make cmake libcrypto++-dev libssl-dev libpcre3 libpcre3-dev git lua5.1 liblua5.1-0-dev
apt-get install linux-headers-`uname -r`

Скачиваем accel-ppp:

wget http://netix.dl.sourceforge.net/project/accel-ppp/accel-ppp-1.11.0.tar.bz2
tar -xjf accel-ppp-1.11.0.tar.bz2
mkdir accel-ppp-build
cd accel-ppp-build

cmake -DCMAKE_INSTALL_PREFIX=/usr/local -DKDIR=/usr/src/linux-headers-`uname -r` -DRADIUS=TRUE -DSHAPER=TRUE -DLOG_PGSQL=FALSE -DLUA=TRUE -DBUILD_IPOE_DRIVER=TRUE ../../accel-ppp-1.11.0  -DCPACK_TYPE=Debian8 -DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_BUILD_TYPE=Release

make
cpack -G DEB
dpkg -i  accel-ppp.deb

Подключаем модуль в системе:

insmod /usr/src/accel-ppp-build/drivers/ipoe/driver/ipoe.ko

В скрипт автозапуска:

nano /etc/init.d/accel-ppp

вставляем следующее:

#!/bin/sh
# /etc/init.d/accel-ppp: set up the accel-ppp server
### BEGIN INIT INFO
# Provides:          accel-ppp
# Required-Start:    $networking
# Required-Stop:     $networking
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
### END INIT INFO

set -e

PATH=/bin:/usr/bin:/sbin:/usr/sbin:/usr/local/sbin;
ACCEL_PPTPD=`which accel-pppd`
. /lib/lsb/init-functions

if test -f /etc/default/accel-ppp; then
  . /etc/default/accel-ppp
fi

if [ -z $ACCEL_PPPTD_OPTS ]; then
ACCEL_PPTPD_OPTS="-c /etc/accel-ppp.conf"
fi

case "$1" in
start)
      log_daemon_msg "Starting accel-ppp server" "accel-pppd"
      if [ x`lsmod |awk /ipoe/'{print $1}'` = x ]; then
        insmod /usr/src/accel-ppp-build/drivers/ipoe/driver/ipoe.ko
      fi
      if start-stop-daemon --start --quiet --oknodo --exec $ACCEL_PPTPD -- -d -p /var/run/accel-pppd.pid $ACCEL_PPTPD_OPTS; then
          log_end_msg 0
      else
          log_end_msg 1
      fi
;;
restart)
      log_daemon_msg "Restarting accel-ppp server" "accel-pppd"
      if [ x`lsmod |awk /ipoe/'{print $1}'` = x ]; then
        insmod /usr/src/accel-ppp-build/drivers/ipoe/driver/ipoe.ko
      fi
      start-stop-daemon --stop --quiet --oknodo --retry 180 --pidfile /var/run/accel-pppd.pid
      if start-stop-daemon --start --quiet --oknodo --exec $ACCEL_PPTPD -- -d -p /var/run/accel-pppd.pid $ACCEL_PPTPD_OPTS; then
          log_end_msg 0
      else
          log_end_msg 1
      fi
;;

stop)
      log_daemon_msg "Stopping accel-ppp server" "accel-pppd"
      start-stop-daemon --stop --quiet --oknodo --retry 180 --pidfile /var/run/accel-pppd.pid
      log_end_msg 0
;;

status)
  do_status
;;
*)
  log_success_msg "Usage: /etc/init.d/accel-ppp {start|stop|status|restart}"
  exit 1
  ;;
esac

exit 0

chmod +x /etc/init.d/accel-ppp
update-rc.d accel-ppp defaults

В файл:

nano /etc/accel-ppp.lua

вставляем

function username(pkt)
return pkt:hdr('chaddr')
end

Ротация логов:

nano  /etc/logrotate.d/accel-ppp

вставляем:

/var/log/accel-ppp/*.log {
    rotate 7
    daily
    size=100M
    compress
    missingok
    sharedscripts
    postrotate
            test -r /var/run/accel-pppd.pid && kill -HUP `cat /var/run/accel-pppd.pid`
    endscript
}

Dictionary

nano /usr/local/share/accel-ppp/radius/dictionary

дописываем в конец:

ATTRIBUTE DHCP-Router-IP-Address 241 ipaddr
ATTRIBUTE DHCP-Mask              242 integer
ATTRIBUTE L4-Redirect      243 integer
ATTRIBUTE L4-Redirect-ipset      244 string
ATTRIBUTE DHCP-Option82          245 octets

# Limit session traffic
ATTRIBUTE Session-Octets-Limit 227 integer
# What to assume as limit - 0 in+out, 1 in, 2 out, 3 max(in,out)
ATTRIBUTE Octets-Direction 228 integer
# Connection Speed Limit
ATTRIBUTE PPPD-Upstream-Speed-Limit 230 integer
ATTRIBUTE PPPD-Downstream-Speed-Limit 231 integer
ATTRIBUTE PPPD-Upstream-Speed-Limit-1 232 integer
ATTRIBUTE PPPD-Downstream-Speed-Limit-1 233 integer
ATTRIBUTE PPPD-Upstream-Speed-Limit-2 234 integer
ATTRIBUTE PPPD-Downstream-Speed-Limit-2 235 integer
ATTRIBUTE PPPD-Upstream-Speed-Limit-3 236 integer
ATTRIBUTE PPPD-Downstream-Speed-Limit-3 237 integer
ATTRIBUTE Acct-Interim-Interval 85 integer
ATTRIBUTE Acct-Input-Gigawords    52      integer
ATTRIBUTE Acct-Output-Gigawords   53      integer

Файл конфигурации

nano /etc/accel-ppp.conf

вставляем:

#ABillS
[modules]
log_file
radius
ipoe
ippool
shaper
pptp
pppoe
auth_mschap_v2
auth_pap
auth_chap_md5
auth_mschap_v1
chap-secrets
sigchld
#pppd_compat


[core]
log-error=/var/log/accel-ppp/core.log
thread-count=1

#[common]
#single-session=replace
#sid-case=upper
#sid-source=seq

[radius]
dictionary=/usr/local/share/accel-ppp/radius/dictionary
#nas-identifier=accel-ipoe
nas-ip-address=192.168.1.1
server=127.0.0.1,radsecret,auth-port=1812,acct-port=1813,req-limit=50,fail-timeout=0,max-fail=10,weight=1
dae-server=192.168.1.1:3799,radsecret
verbose=100
attr-tunnel-type=NAS-Identifier
gw-ip-address=192.168.1.1

[ipoe]
verbose=100
username=lua:username
lua-file=/etc/accel-ppp.lua
lease-time=300
max-lease-time=300
attr-dhcp-client-ip=Framed-IP-Address
gw-ip-address=10.0.0.1/24
proxy-arp=1
shared=1
ifcfg=1
mode=L2
start=dhcpv4
interface=eth0
#agent-remote-id=accel-ppp
attr-dhcp-opt82=DHCP-Option82

#[ip-pool]
#gw-ip-address=192.168.0.1/24
#attr=Framed-Pool
#192.168.0.2-254,name=pool1

#[lcp]
#echo-interval=30
#echo-failure=3

[pptp]
bind=192.168.1.1
verbose=1
mppe=allow
echo-interval=30

[ppp]
verbose=1
min-mtu=1400
mtu=1492
mru=1492
#ccp=0
#sid-case=lower
mppe=allow
#ipv4=require
#lcp-echo-interval=3
#lcp-echo-failure=9

[pppoe]
interface=eth0
nas-identifier=accel-pppoe
#ac-name=xxx
#service-name=yyy
#pado-delay=0
#pado-delay=0,100:100,200:200,-1:500
#ifname-in-sid=called-sid
#tr101=1
verbose=1

[client-ip-range]
#10.0.0.0/8

[dns]
dns1=8.8.8.8

[log]
log-file=/var/log/accel-ppp/accel-ppp.log
log-emerg=/var/log/accel-ppp/emerg.log
log-fail-file=/var/log/accel-ppp/auth-fail.log
copy=1
color=1
#per-user-dir=per_user
#per-session-dir=per_session
#per-session=1
level=100

[shaper]
attr=Filter-Id
#down-burst-factor=0.1
#up-burst-factor=1.0
#latency=50
#mpu=0
#mtu=0
#r2q=10
#quantum=1500
#moderate-quantum=1
#hightspeed shaper
ifb=ifb0
cburst=1534
up-limiter=htb
down-limiter=htb
#low speed shaper
#up-limiter=police
#down-limiter=tbf
#leaf-qdisc=sfq perturb 10
#leaf-qdisc=fq_codel [limit PACKETS] [flows NUMBER] [target TIME] [interval TIME] [quantum BYTES] [[no]ecn]
#rate-multiplier=1
#fwmark=1
attr-down=PPPD-Downstream-Speed-Limit
attr-up=PPPD-Upstream-Speed-Limit
verbose=10

[pppd-compat]
#ip-up=/etc/ppp/ip-up
#ip-down=/etc/ppp/ip-down
#radattr-prefix=/var/run/radattr
verbose=1

[cli]
verbose=100
telnet=127.0.0.1:2000
tcp=127.0.0.1:2001
password=radsecret

[snmp]
master=0
agent-name=accel-ppp

[connlimit]
limit=10/min
burst=3
timeout=60

Запуск:

service accel-ppp start

Консоль управления

Мониторинг параметров Accel-ppp

Меню Настройка>Сервер доступа>Консоль

Автонастройка конфигурации

cd /usr/abills/misc/
./autoconf PROGRAMS=accel_ppp

Дополнительно

Обсуждение на форуме

Space shortcuts

Child pages