=====Настройка PPPoE Ubuntu=====

====FREERADIUS====
Добавляем атрибуты 
** /usr/local/freeradius/etc/raddb/dictionary **
<code>
# Limit session traffic
ATTRIBUTE       Session-Octets-Limit            227     integer
# What to assume as limit - 0 in+out, 1 in, 2 out, 3 max(in,out)
ATTRIBUTE       Octets-Direction                228     integer
# Connection Speed Limit
ATTRIBUTE       PPPD-Upstream-Speed-Limit       230     integer
ATTRIBUTE       PPPD-Downstream-Speed-Limit     231     integer
ATTRIBUTE       PPPD-Upstream-Speed-Limit-1     232     integer
ATTRIBUTE       PPPD-Downstream-Speed-Limit-1   233     integer
ATTRIBUTE       PPPD-Upstream-Speed-Limit-2     234     integer
ATTRIBUTE       PPPD-Downstream-Speed-Limit-2   235     integer
ATTRIBUTE       PPPD-Upstream-Speed-Limit-3     236     integer
ATTRIBUTE       PPPD-Downstream-Speed-Limit-3   237     integer
ATTRIBUTE       Acct-Interim-Interval           85      integer
ATTRIBUTE       Acct-Input-Gigawords            52      integer
ATTRIBUTE       Acct-Output-Gigawords           53      integer

</code>

====RADIUSCLIENT====

  apt-get install radiusclient1

**/etc/radiusclient/servers**

   127.0.0.1    radsecret

 Для того, чтобы нужные атрибуты распознавались радиусом и радиус-клиентом, нужно добавить их в соответствующие словари **/etc/radiusclient/dictionary**

<code>
# Limit session traffic 
ATTRIBUTE       Session-Octets-Limit            227     integer
# What to assume as limit - 0 in+out, 1 in, 2 out, 3 max(in,out)
ATTRIBUTE       Octets-Direction                228     integer
# Connection Speed Limit
ATTRIBUTE       PPPD-Upstream-Speed-Limit       230     integer
ATTRIBUTE       PPPD-Downstream-Speed-Limit     231     integer
ATTRIBUTE       PPPD-Upstream-Speed-Limit-1     232     integer
ATTRIBUTE       PPPD-Downstream-Speed-Limit-1   233     integer
ATTRIBUTE       PPPD-Upstream-Speed-Limit-2     234     integer
ATTRIBUTE       PPPD-Downstream-Speed-Limit-2   235     integer
ATTRIBUTE       PPPD-Upstream-Speed-Limit-3     236     integer
ATTRIBUTE       PPPD-Downstream-Speed-Limit-3   237     integer
ATTRIBUTE       Acct-Interim-Interval            85     integer
ATTRIBUTE       Acct-Input-Gigawords             52     integer
ATTRIBUTE       Acct-Output-Gigawords            53     integer
</code>

====PPPOE====

  apt-get install ppp-dev
  apt-get install gcc binutils
  cd /usr/src
  wget http://www.roaringpenguin.com/files/download/rp-pppoe-3.10.tar.gz
  tar xvzf rp-pppoe-3.10.tar.gz
  cd rp-pppoe-3.10/src/
  ./configure --enable-plugin=/usr/lib/pppd/2.4.5/rp-pppoe.so
  make
  make install

**Проверяем**
  pppoe-server -I eth0 -L 192.168.170.2 -N 255 -k

Если не ругнулся значит всё правильно
Убиваем процес

  killall pppoe-server


Редактируем опции

** /etc/ppp/pppoe-server-options **

<code>
# PPP options for the PPPoE server
# LIC: GPL
require-chap
require-mschap-v2
proxyarp
nologfd
#passive
#login
lcp-echo-interval 30
lcp-echo-failure 5
mtu 1500
mru 1500
ms-dns 8.8.4.4
ms-dns 8.8.8.8
debug
plugin radius.so
plugin radattr.so
logfile /var/log/pppoe-server.log

</code>

Делаем файл автозапуска
**/etc/init.d/pppoe**

<code>
#!/bin/bash
### BEGIN INIT INFO
# Provides:          pppoe
# Required-Start:    $remote_fs $syslog
# Required-Stop:     $remote_fs $syslog
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Start daemon at boot time
# Description:       Enable service provided by daemon.
### END INIT INFO

PATH=/bin:/usr/bin:/sbin:/usr/sbin:/usr/local/sbin:/usr/local/bin
FLAGS="defaults 50"

LOCAL_IP=192.100.0.1
IFACE=eth0

case "$1" in
  start)
    echo "Starting PPPoE.... "
    echo "  Starting PPPoE on VLAN..."
    /usr/sbin/pppoe-server -N 1000 -k -L ${LOCAL_IP}  -I ${IFACE} 
    echo "pppoe."
    ;;
  stop)
    echo -n "Stopping PPPoE: "
    killall -9 pppd
    killall pppoe-server
    echo "pppoe."
    ;;
  force-reload|restart)
    echo "Restarting PPPoE: "
    sh $0 stop
    sh $0 start
    ;;
  *)
    echo "Usage: /etc/init.d/pppoe {start|stop|restart|force-reload}"
    exit 1
    ;;
esac

exit 0
</code>


Сделаем его исполняемым

  chmod +x /etc/init.d/pppoe

Добавляем в автозапуск 

  update-rc.d pppoe start 70 2 3 4 5 . stop 20 0 1 6 .

Стартуем

  /etc/init.d/pppoe start

====Шейпер====

  cp /usr/abills/misc/pppd/ip-up.local /etc/ppp
  

=====ABillS=====


''/ Настройка / Сервера доступа/''

^Type:                 | pppd |
^Alive:                | Интервал RADIUS Alive пакетов. Желательно значение 120 |
^:Manage:              | |
^IP:PORT:              | IP-адрес и порт, на котором система сброса (pppd_kill) слушает команды |
^Password:             | Пароль |
^Radius Pairs:         | Дополнительные RADIUS атрибуты.   |