you don't need vlan modulemanyax писал(а):Found the vlan module http://abills.net.ua/wiki/doku.php/abil ... []=modules. I guess I need it enabled.
It's very difficult to configure this without information in English.
Abills with Accel-ppp ipoe vlan per client
-
- Site Admin
- Сообщения: 5746
- Зарегистрирован: Пт янв 28, 2005 3:11 pm
- Контактная информация:
Re: Abills with Accel-ppp ipoe vlan per client
-
- Site Admin
- Сообщения: 5746
- Зарегистрирован: Пт янв 28, 2005 3:11 pm
- Контактная информация:
Re: Abills with Accel-ppp ipoe vlan per client
I wrote you must configure accel-pppmanyax писал(а):I don't understand then how a circuit / sector will look like, in abills, I can't seem to find the logic in the configuration stepst. Where do I specify the outer and inner vlan? when I add a user I only have vlan. In Equipment I can only define the ports and ports numbers.
Can you point me to some example that can cover what I need, if it's possible
- connect to radius server
And show access request then we cant wrote configration option for billing
-
- Site Admin
- Сообщения: 5746
- Зарегистрирован: Пт янв 28, 2005 3:11 pm
- Контактная информация:
Re: Abills with Accel-ppp ipoe vlan per client
we make later step by step configuration manual for q in q with accel
Re: Abills with Accel-ppp ipoe vlan per client
I just want to make sure that I was explicit enough and you understand where I'm going with this.
What I'm trying to get from Abills, is to have a way to define the sectors something like
client1 is connected on port 2 in CPE1 (and it's preset untagged in vlan 20), static IP attributes
client4 is connected on port 3 in CPE1 (vlan 21)
and so on..
So I can have an operator account that will only be allowed to create/enable the client based on the CPE and port(circuit). and the client will get a preset static IP and network attributes
Is this possible in the current version of Abills?
-
- Site Admin
- Сообщения: 5746
- Зарегистрирован: Пт янв 28, 2005 3:11 pm
- Контактная информация:
Re: Abills with Accel-ppp ipoe vlan per client
manyax писал(а):
I just want to make sure that I was explicit enough and you understand where I'm going with this.
What I'm trying to get from Abills, is to have a way to define the sectors something like
client1 is connected on port 2 in CPE1 (and it's preset untagged in vlan 20), static IP attributes
client4 is connected on port 3 in CPE1 (vlan 21)
and so on..
So I can have an operator account that will only be allowed to create/enable the client based on the CPE and port(circuit). and the client will get a preset static IP and network attributes
Is this possible in the current version of Abills?
Yes
Re: Abills with Accel-ppp ipoe vlan per client
What modules do I need enabled?
I have
our @MODULES = ('Dv',
# 'Docs',
# 'Mail',
'Msgs',
'Config',
'Sysinfo',
#Device monitoring and manage via snmp
'Equipment',
'Dhcphosts',
# 'Ipn',
# 'Tags',
# 'Cards',
'Ping',
'Netlist',
'Sqlcmd',
);
I have
our @MODULES = ('Dv',
# 'Docs',
# 'Mail',
'Msgs',
'Config',
'Sysinfo',
#Device monitoring and manage via snmp
'Equipment',
'Dhcphosts',
# 'Ipn',
# 'Tags',
# 'Cards',
'Ping',
'Netlist',
'Sqlcmd',
);
-
- Site Admin
- Сообщения: 5746
- Зарегистрирован: Пт янв 28, 2005 3:11 pm
- Контактная информация:
Re: Abills with Accel-ppp ipoe vlan per client
manyax писал(а):What modules do I need enabled?
I have
our @MODULES = ('Dv',
# 'Docs',
# 'Mail',
'Msgs',
'Config',
'Sysinfo',
#Device monitoring and manage via snmp
'Equipment',
'Dhcphosts',
# 'Ipn',
# 'Tags',
# 'Cards',
'Ping',
'Netlist',
'Sqlcmd',
);
for internet you need only Dv, Dhcphosts
Re: Abills with Accel-ppp ipoe vlan per client
I don't understand how to construct the AUTH_EXPR if I can't find the logic in the web interface on how will I define the circuits.
From radius
Client in vlan 10
https://pastebin.com/e3AMzyX7
Client in qinq 800.11
https://pastebin.com/XUMTW7Mb
From radius
Client in vlan 10
https://pastebin.com/e3AMzyX7
Client in qinq 800.11
https://pastebin.com/XUMTW7Mb
Re: Abills with Accel-ppp ipoe vlan per client
Don't I need also the 'Equipment' module ?
Re: Abills with Accel-ppp ipoe vlan per client
I can only find a way to authenticate the user based on its MAC, what steps do I need to make to create circuits based on vlan/ outer vlans?
Re: Abills with Accel-ppp ipoe vlan per client
I can now authenticate the user based on the interface name, ex: eth1.100. But I can't understand how to set Abills to assign the username with circuits. If I don't set a static IP in the internet, It doesn't work
Customers>Logins>Information>Services>Internet
Customers>Logins>Information>Services>Internet
-
- Site Admin
- Сообщения: 5746
- Зарегистрирован: Пт янв 28, 2005 3:11 pm
- Контактная информация:
Re: Abills with Accel-ppp ipoe vlan per client
config.plmanyax писал(а):I don't understand how to construct the AUTH_EXPR if I can't find the logic in the web interface on how will I define the circuits.
From radius
Client in vlan 10
https://pastebin.com/e3AMzyX7
$conf{AUTH_EXPR}='Called-Station-Id:eth1\.(\d+):VLAN_DEC';
$conf{AUTH_PARAMS}=1;
config.plmanyax писал(а): Client in qinq 800.11
https://pastebin.com/XUMTW7Mb
$conf{AUTH_EXPR}='Called-Station-Id:eth1\.(\d+)\.(\d+):SERVER_VLAN,VLAN_DEC';
$conf{AUTH_PARAMS}=1;
Re: Abills with Accel-ppp ipoe vlan per client
Thanks.. I figure it out
But now I need to find the logic on how to configure abills.
Is SERVER_VLAN .. Configuration>NAS>IP POOLs extra VLAN ?
and PORT,VLAN is Customers>Logins>Information>Services>IPoE (DHCP)
I need to make static circuits.
Also Is it possible to make IP guard, to take clients IP? or make the client take the IP from IPoE (DHCP) and not from internet. How should I configure that.
Код: Выделить всё
$conf{AUTH_EXPR}='Called-Station-Id:(\d+)\W(\d+):PORT_DEC,VLAN_DEC';
Is SERVER_VLAN .. Configuration>NAS>IP POOLs extra VLAN ?
and PORT,VLAN is Customers>Logins>Information>Services>IPoE (DHCP)
I need to make static circuits.
Also Is it possible to make IP guard, to take clients IP? or make the client take the IP from IPoE (DHCP) and not from internet. How should I configure that.
-
- Site Admin
- Сообщения: 5746
- Зарегистрирован: Пт янв 28, 2005 3:11 pm
- Контактная информация:
Re: Abills with Accel-ppp ipoe vlan per client
Configuration>NAS>IP POOLsmanyax писал(а):Thanks.. I figure it outBut now I need to find the logic on how to configure abills.Код: Выделить всё
$conf{AUTH_EXPR}='Called-Station-Id:(\d+)\W(\d+):PORT_DEC,VLAN_DEC';
Is SERVER_VLAN .. Configuration>NAS>IP POOLs extra VLAN ?
and PORT,VLAN is Customers>Logins>Information>Services>IPoE (DHCP)
For dynamic ip addres assign
For static IP
Customers>Logins>Information>Services>Internet
Static IP you must assign only in Internet sectionmanyax писал(а): I need to make static circuits.
Also Is it possible to make IP guard, to take clients IP? or make the client take the IP from IPoE (DHCP) and not from internet. How should I configure that.
Re: Abills with Accel-ppp ipoe vlan per client
What if I'll do IP pool / client in ? Configuration>NAS>IP POOLs
I want to allow an operator to chose .. traffic plan 100Mb/s .. 200Mb/s and chose something like CPE port number .. so If I name the IP pools CPE1-port2 .. will this work ?
Can I have multiple $conf{AUTH_EXPR}= ?? If matches the first .. else if match with the second ?
I want to allow an operator to chose .. traffic plan 100Mb/s .. 200Mb/s and chose something like CPE port number .. so If I name the IP pools CPE1-port2 .. will this work ?
Can I have multiple $conf{AUTH_EXPR}= ?? If matches the first .. else if match with the second ?