Страница 5 из 5
Re: Abills with Accel-ppp ipoe vlan per client
Добавлено: Пт апр 21, 2017 9:55 am
~AsmodeuS~
manyax писал(а):Does it need to be a 'live' device?
Is it possible to define VLAN ID / switch port .. as I can see it only try to get vlan information from snmp.
What NAS type should I use?
1 alive
2 vlan manual defined
3 via snmp you can get vlans
Re: Abills with Accel-ppp ipoe vlan per client
Добавлено: Пт апр 21, 2017 9:57 am
~AsmodeuS~
manyax писал(а):
Код: Выделить всё
Sending Access-Accept of id 1 to 192.168.41.194 port 45185
Filter-Id = "60000"
Acct-Interim-Interval = 300
Session-Timeout = 604800
Framed-IP-Address = 192.168.112.1
Framed-IP-Netmask = 255.255.255.255
Finished request 20.
I don't understand from where this is coming from
Only works, if I set the IP address in Customers>Logins>Information>Services>Internet
in version 0.75 IP from user only on Internet
Re: Abills with Accel-ppp ipoe vlan per client
Добавлено: Пт апр 21, 2017 10:09 am
manyax
password from user ???
I don't understand
Re: Abills with Accel-ppp ipoe vlan per client
Добавлено: Пт апр 21, 2017 10:29 am
~AsmodeuS~
manyax писал(а):password from user ???
I don't understand
sorry IP
Re: Abills with Accel-ppp ipoe vlan per client
Добавлено: Пт апр 21, 2017 10:41 am
manyax
When will a new version be released? This doesn't work for me
Re: Abills with Accel-ppp ipoe vlan per client
Добавлено: Пт апр 21, 2017 2:47 pm
~AsmodeuS~
manyax писал(а):When will a new version be released? This doesn't work for me
0.76 Free version on september
commercial next week
Re: Abills with Accel-ppp ipoe vlan per client
Добавлено: Чт апр 26, 2018 12:47 pm
manyax
Hi ~AsmodeuS~,
Does the internet+ module replace the need of Dv and Dhcphosts?
What's the equivalent for $conf{AUTH_EXPR}= in internet+, or is it needed? to authenticate based on interface name 'Called-Station-Id'
Can I now achieve what I initially wanted ?
Re: Abills with Accel-ppp ipoe vlan per client
Добавлено: Чт апр 26, 2018 2:05 pm
~AsmodeuS~
manyax писал(а):Hi ~AsmodeuS~,
Does the internet+ module replace the need of Dv and Dhcphosts?
yes it's replace of Dv Dhcphost Ipn Vlan
manyax писал(а):
What's the equivalent for $conf{AUTH_EXPR}= in internet+, or is it needed? to authenticate based on interface name 'Called-Station-Id'
for I+
$conf{AUTH_EXPR}
manyax писал(а):
Can I now achieve what I initially wanted ?
yes
Re: Abills with Accel-ppp ipoe vlan per client
Добавлено: Пн апр 30, 2018 10:24 am
manyax
I can't figure it out, I want to authenticate client based on the `Called-Station-Id = eth1.100.110`
In config.pl
#TEST IPoE
$AUTH{accel_ipoe}='Auth2';
$ACCT{accel_ipoe}='Auth2';
$conf{AUTH_EXPR}='Called-Station-Id:eth1\.(\d+)\.(\d+):SERVER_VLAN,VLAN_DEC'
$conf{AUTH_PARAMS}=1;
Tarif plans:
Configuration>Internet+>Tarif plans
Name: client1
Other: IP Pool: client1
IP pool:
Configuration>NAS>IP POOLs
Name: client1
Extra: Server VLAN: 100
But where to define the client vlan, if I want the operator to select only a tariff plan or any other parameter that can point to the circuit ?
It can't be Customers>Logins>Information
IPoE / DHCP Option 82 VLAN ID:
This way the operator needs to know what vlan to chose.
Re: Abills with Accel-ppp ipoe vlan per client
Добавлено: Пн апр 30, 2018 1:24 pm
~AsmodeuS~
manyax писал(а):I can't figure it out, I want to authenticate client based on the `Called-Station-Id = eth1.100.110`
In config.pl
#TEST IPoE
$AUTH{accel_ipoe}='Auth2';
$ACCT{accel_ipoe}='Auth2';
$conf{AUTH_EXPR}='Called-Station-Id:eth1\.(\d+)\.(\d+):SERVER_VLAN,VLAN_DEC'
$conf{AUTH_PARAMS}=1;
Tarif plans:
Configuration>Internet+>Tarif plans
Name: client1
Other: IP Pool: client1
IP pool:
Configuration>NAS>IP POOLs
Name: client1
Extra: Server VLAN: 100
But where to define the client vlan, if I want the operator to select only a tariff plan or any other parameter that can point to the circuit ?
It can't be Customers>Logins>Information
IPoE / DHCP Option 82 VLAN ID:
This way the operator needs to know what vlan to chose.
IPoE / DHCP Option 82
http://abills.net.ua/wiki/doku.php/abil ... ernet_user