Страница 4 из 5
Re: Abills with Accel-ppp ipoe vlan per client
Добавлено: Чт апр 20, 2017 4:50 pm
~AsmodeuS~
manyax писал(а):Yes but that's not the DHCP network with vlan and server vlan .. it's the IP pool defined on the NAS ..
if assign ip on IP/DHCP you can't put it to client, only ip on Internet is allow for user assign for accel-ppp
(in version 0.76 we improve it)
Re: Abills with Accel-ppp ipoe vlan per client
Добавлено: Чт апр 20, 2017 6:22 pm
manyax
In DHCP networks I don't have the outer vlan tag (server vlan). How can I then pre-set 'circuits'? The 'operator' doesn't need to know the vlans tags or IP.
Re: Abills with Accel-ppp ipoe vlan per client
Добавлено: Пт апр 21, 2017 4:48 am
~AsmodeuS~
manyax писал(а):In DHCP networks I don't have the outer vlan tag (server vlan). How can I then pre-set 'circuits'? The 'operator' doesn't need to know the vlans tags or IP.
one more time
1. auto ip asignment maked by static chekbox in network configuration
2. auto vlan mked the same place
you can try it on demo
Re: Abills with Accel-ppp ipoe vlan per client
Добавлено: Пт апр 21, 2017 5:00 am
manyax
Yes, but I'm talking about the 'server vlan' qinq.
This can only be set when you add a user and not selected from a list, like you can with the networks.
Re: Abills with Accel-ppp ipoe vlan per client
Добавлено: Пт апр 21, 2017 5:20 am
~AsmodeuS~
manyax писал(а):Yes, but I'm talking about the 'server vlan' qinq.
This can only be set when you add a user and not selected from a list, like you can with the networks.
Server vlan
Mainteince -> Equipment -> Vlans
Re: Abills with Accel-ppp ipoe vlan per client
Добавлено: Пт апр 21, 2017 5:23 am
manyax
So I need the Equipment module ..I thought only DV and dhcphosts.
Mainteince -> Equipment -> Vlans
Can't find Vlans in Equipment. In demo, at least.
Re: Abills with Accel-ppp ipoe vlan per client
Добавлено: Пт апр 21, 2017 5:37 am
~AsmodeuS~
manyax писал(а):So I need the Equipment module ..I thought only DV and dhcphosts.
Mainteince -> Equipment -> Vlans
Can't find Vlans in Equipment. In demo, at least.
sorry
Maintain>Vlan
Re: Abills with Accel-ppp ipoe vlan per client
Добавлено: Пт апр 21, 2017 6:17 am
manyax
That works
This would have been nice in future version, to have the ability to assign the user to a port, on a pre defined equipment switch.
Like you do with the inner vlan on DHCP networks, to define the inner vlan on the switch.
Re: Abills with Accel-ppp ipoe vlan per client
Добавлено: Пт апр 21, 2017 6:36 am
~AsmodeuS~
manyax писал(а):That works
This would have been nice in future version, to have the ability to assign the user to a port, on a pre defined equipment switch.
Like you do with the inner vlan on DHCP networks, to define the inner vlan on the switch.
if you add switch with models you will see users ports on DHCP port
Re: Abills with Accel-ppp ipoe vlan per client
Добавлено: Пт апр 21, 2017 6:48 am
manyax
Do I need to add the switch as NAS ?
Is it possible to define VLAN ID / switch port .. as I can see it only try to get vlan information from snmp.
Re: Abills with Accel-ppp ipoe vlan per client
Добавлено: Пт апр 21, 2017 7:18 am
~AsmodeuS~
manyax писал(а):Do I need to add the switch as NAS ?
yes
Add Nas -> Menu #Extra# -> Snmp test -> add equipment
Re: Abills with Accel-ppp ipoe vlan per client
Добавлено: Пт апр 21, 2017 7:24 am
manyax
Add Nas -> Menu #Extra# -> Snmp test -> add equipment
Can't find SNMP test
Re: Abills with Accel-ppp ipoe vlan per client
Добавлено: Пт апр 21, 2017 7:26 am
~AsmodeuS~
manyax писал(а):Add Nas -> Menu #Extra# -> Snmp test -> add equipment
Can't find SNMP test
http://abills.net.ua/wiki/doku.php/abil ... ment_model
Re: Abills with Accel-ppp ipoe vlan per client
Добавлено: Пт апр 21, 2017 7:45 am
manyax
Does it need to be a 'live' device?
Is it possible to define VLAN ID / switch port .. as I can see it only try to get vlan information from snmp.
What NAS type should I use?
Re: Abills with Accel-ppp ipoe vlan per client
Добавлено: Пт апр 21, 2017 9:03 am
manyax
Код: Выделить всё
Sending Access-Accept of id 1 to 192.168.41.194 port 45185
Filter-Id = "60000"
Acct-Interim-Interval = 300
Session-Timeout = 604800
Framed-IP-Address = 192.168.112.1
Framed-IP-Netmask = 255.255.255.255
Finished request 20.
I don't understand from where this is coming from
Only works, if I set the IP address in Customers>Logins>Information>Services>Internet