manyax писал(а):Does it need to be a 'live' device?
Is it possible to define VLAN ID / switch port .. as I can see it only try to get vlan information from snmp.
What NAS type should I use?
1 alive
2 vlan manual defined
3 via snmp you can get vlans
Hi ~AsmodeuS~,
Does the internet+ module replace the need of Dv and Dhcphosts?
What's the equivalent for $conf{AUTH_EXPR}= in internet+, or is it needed? to authenticate based on interface name 'Called-Station-Id'
Can I now achieve what I initially wanted ?
manyax писал(а):Hi ~AsmodeuS~,
Does the internet+ module replace the need of Dv and Dhcphosts?
yes it's replace of Dv Dhcphost Ipn Vlan
manyax писал(а):
What's the equivalent for $conf{AUTH_EXPR}= in internet+, or is it needed? to authenticate based on interface name 'Called-Station-Id'
for I+
$conf{AUTH_EXPR}
manyax писал(а):
Can I now achieve what I initially wanted ?
I can't figure it out, I want to authenticate client based on the `Called-Station-Id = eth1.100.110`
In config.pl
#TEST IPoE
$AUTH{accel_ipoe}='Auth2';
$ACCT{accel_ipoe}='Auth2';
$conf{AUTH_EXPR}='Called-Station-Id:eth1\.(\d+)\.(\d+):SERVER_VLAN,VLAN_DEC'
$conf{AUTH_PARAMS}=1;
Tarif plans:
Configuration>Internet+>Tarif plans
Name: client1
Other: IP Pool: client1
IP pool:
Configuration>NAS>IP POOLs
Name: client1
Extra: Server VLAN: 100
But where to define the client vlan, if I want the operator to select only a tariff plan or any other parameter that can point to the circuit ?
It can't be Customers>Logins>Information
IPoE / DHCP Option 82 VLAN ID:
This way the operator needs to know what vlan to chose.
manyax писал(а):I can't figure it out, I want to authenticate client based on the `Called-Station-Id = eth1.100.110`
In config.pl
#TEST IPoE
$AUTH{accel_ipoe}='Auth2';
$ACCT{accel_ipoe}='Auth2';
$conf{AUTH_EXPR}='Called-Station-Id:eth1\.(\d+)\.(\d+):SERVER_VLAN,VLAN_DEC'
$conf{AUTH_PARAMS}=1;
Tarif plans:
Configuration>Internet+>Tarif plans
Name: client1
Other: IP Pool: client1
IP pool:
Configuration>NAS>IP POOLs
Name: client1
Extra: Server VLAN: 100
But where to define the client vlan, if I want the operator to select only a tariff plan or any other parameter that can point to the circuit ?
It can't be Customers>Logins>Information
IPoE / DHCP Option 82 VLAN ID:
This way the operator needs to know what vlan to chose.