log freeradius -X
Ready to process requests.
rad_recv: Access-Request packet from host 127.0.0.1 port 43182, id=130, length=132
Service-Type = Framed-User
Framed-Protocol = PPP
User-Name = "scsi"
MS-CHAP-Challenge = 0x7b2b17912a4cf0b2990daf122b48d82c
MS-CHAP2-Response = 0x86005061f7d9159652dfea4fb58f3af439c90000000000000000f79fa86ba8bc97901291a2b8e3e9e6cd6cb50b8dd5f0608e
NAS-IP-Address = 172.30.60.8
NAS-Port = 0
+- entering group authorize
users: Matched entry DEFAULT at line 1
++[files] returns ok
Exec-Program output: Acct-Interim-Interval = 60, Session-Timeout = 2507037, PPPD-Upstream-Speed-Limit = 3000, Octets-Direction = 1, Framed-IP-Address = 10.0.0.105, Session-Octets-Limit = 2146435072, Framed-IP-Netmask = 255.255.255.255, PPPD-Downstream-Speed-Limit = 5000,
Exec-Program-Wait: value-pairs: Acct-Interim-Interval = 60, Session-Timeout = 2507037, PPPD-Upstream-Speed-Limit = 3000, Octets-Direction = 1, Framed-IP-Address = 10.0.0.105, Session-Octets-Limit = 2146435072, Framed-IP-Netmask = 255.255.255.255, PPPD-Downstream-Speed-Limit = 5000,
Exec-Program: returned: 0
++[auth] returns ok
++[preprocess] returns ok
rad_check_password: Found Auth-Type Accept
rad_check_password: Auth-Type = Accept, accepting the user
Login OK: [scsi/<via Auth-Type = Accept>] (from client localhost port 0)
+- entering group post-auth
++[exec] returns noop
Sending Access-Accept of id 130 to 127.0.0.1 port 43182
Acct-Interim-Interval = 60
Session-Timeout = 2507037
PPPD-Upstream-Speed-Limit = 3000
Octets-Direction = Route-IP-Yes
Framed-IP-Address = 10.0.0.105
Session-Octets-Limit = 2146435072
Framed-IP-Netmask = 255.255.255.255
PPPD-Downstream-Speed-Limit = 5000
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
Cleaning up request 0 ID 130 with timestamp +13
Ready to process requests.
log pppoe
lugin radius.so loaded.
RADIUS plugin initialized.
Plugin radattr.so loaded.
RADATTR plugin initialized.
using channel 8
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
sent [LCP ConfReq id=0x1 <mru 1472> <auth chap MS-v2> <magic 0x2f3d40b9>]
rcvd [LCP ConfAck id=0x1 <mru 1472> <auth chap MS-v2> <magic 0x2f3d40b9>]
rcvd [LCP ConfReq id=0x1 <mru 1480> <magic 0x2bde3419> <callback CBCP>]
sent [LCP ConfRej id=0x1 <callback CBCP>]
rcvd [LCP ConfReq id=0x2 <mru 1480> <magic 0x2bde3419>]
sent [LCP ConfAck id=0x2 <mru 1480> <magic 0x2bde3419>]
sent [LCP EchoReq id=0x0 magic=0x2f3d40b9]
sent [CHAP Challenge id=0x86 <7b2b17912a4cf0b2990daf122b48d82c>, name = "inetgs.okisi.net"]
rcvd [LCP Ident id=0x3 magic=0x2bde3419 "MSRASV5.10"]
rcvd [LCP Ident id=0x4 magic=0x2bde3419 "MSRAS-0-SCSI"]
rcvd [LCP EchoRep id=0x0 magic=0x2bde3419]
rcvd [CHAP Response id=0x86 <5061f7d9159652dfea4fb58f3af439c90000000000000000f79fa86ba8bc97901291a2b8e3e9e6cd6cb50b8dd5f0608e00>, name = "scsi"]
RADATTR plugin wrote 8 line(s) to file /var/run/radattr.ppp0.
Peer scsi failed CHAP authentication
sent [CHAP Failure id=0x86 ""]
sent [LCP TermReq id=0x2 "Authentication failed"]
rcvd [LCP TermAck id=0x2 "Authentication failed"]
Connection terminated.
Waiting for 1 child processes...
script /usr/sbin/pppoe -n -I eth0 -e 8:00:13:d4
f4:82 -S '', pid 4100Terminating on signal 15
