Abills + Debian

[Xramovnik]

Доброго времени суток господа форумчане!
Возникла необходимость настроить шлюз для выхода организации в интернет. В качастве ОС выбрал Debian 4, для биллинга Abills 0.34. Все настройки выполнил по статье http://omsk.lug.ru/cgi-bin/moin.py/Abills. Однако при попытке проверить созданую учетную запись через radtest вываливается это:

debian:/# radtest alexandr qwerty 127.0.0.1 1812 radsecret
Sending Access-Request of id 79 to 127.0.0.1 port 1812
User-Name = "alexandr"
User-Password = "qwerty"
NAS-IP-Address = 255.255.255.255
NAS-Port = 1812
Re-sending Access-Request of id 79 to 127.0.0.1 port 1812
User-Name = "alexandr"
User-Password = "qwerty"
NAS-IP-Address = 255.255.255.255
NAS-Port = 1812
rad_recv: Access-Reject packet from host 127.0.0.1:1812, id=79, length=53
Reply-Message = "Unknow server '255.255.255.255'"

Откуда взялся "Unknow server '255.255.255.255'" - для меня загадка. Может вы что подскажете? И естественно авторизация по VPN тоже не проходит, неверные логин и пароль.

Вот лог abills'а:
2008-04-12 12:21:27 LOG_WARNING: AUTH [alexandr] NAS: 0 Unknow server '127.0.0.1'
2008-04-12 12:21:28 LOG_INFO: AUTH [alexandr] AUTH REJECT CID 192.168.2.13
2008-04-12 12:21:47 LOG_WARNING: AUTH [alexandr] NAS: 0 Unknow server '127.0.0.1'
2008-04-12 12:21:48 LOG_INFO: AUTH [alexandr] AUTH REJECT CID 192.168.2.13
2008-04-12 12:22:41 LOG_WARNING: AUTH [alexandr] NAS: 0 Unknow server '255.255.255.255'
2008-04-12 12:22:42 LOG_INFO: AUTH [alexandr] AUTH REJECT
2008-04-12 12:47:20 LOG_WARNING: AUTH [alexandr] NAS: 0 Unknow server '255.255.255.255'
2008-04-12 12:47:21 LOG_INFO: AUTH [alexandr] AUTH REJECT
//=======================================================================================
Вывод pptpd:
Apr 12 12:21:46 localhost pptpd[2870]: MGR: Launching /usr/sbin/pptpctrl to handle client
Apr 12 12:21:46 localhost pptpd[2870]: CTRL: local address = 192.168.250.1
Apr 12 12:21:46 localhost pptpd[2870]: CTRL: remote address = 192.168.1.1
Apr 12 12:21:46 localhost pptpd[2870]: CTRL: pppd options file = /etc/ppp/pptpd-options
Apr 12 12:21:46 localhost pptpd[2870]: CTRL: Client 192.168.2.13 control connection started
Apr 12 12:21:46 localhost pptpd[2870]: CTRL: Received PPTP Control Message (type: 1)
Apr 12 12:21:46 localhost pptpd[2870]: CTRL: Made a START CTRL CONN RPLY packet
Apr 12 12:21:46 localhost pptpd[2870]: CTRL: I wrote 156 bytes to the client.
Apr 12 12:21:46 localhost pptpd[2870]: CTRL: Sent packet to client
Apr 12 12:21:46 localhost pptpd[2870]: CTRL: Received PPTP Control Message (type: 7)
Apr 12 12:21:46 localhost pptpd[2870]: CTRL: Set parameters to 100000000 maxbps, 64 window size
Apr 12 12:21:46 localhost pptpd[2870]: CTRL: Made a OUT CALL RPLY packet
Apr 12 12:21:46 localhost pptpd[2870]: CTRL: Starting call (launching pppd, opening GRE)
Apr 12 12:21:46 localhost pptpd[2870]: CTRL: pty_fd = 6
Apr 12 12:21:46 localhost pptpd[2870]: CTRL: tty_fd = 7
Apr 12 12:21:46 localhost pptpd[2871]: CTRL (PPPD Launcher): program binary = /usr/sbin/pppd
Apr 12 12:21:46 localhost pptpd[2871]: CTRL (PPPD Launcher): local address = 192.168.250.1
Apr 12 12:21:46 localhost pptpd[2871]: CTRL (PPPD Launcher): remote address = 192.168.1.1
Apr 12 12:21:46 localhost pptpd[2870]: CTRL: I wrote 32 bytes to the client.
Apr 12 12:21:46 localhost pptpd[2870]: CTRL: Sent packet to client
Apr 12 12:21:46 localhost pptpd[2870]: GRE: accepting packet #0
Apr 12 12:21:46 localhost pptpd[2870]: CTRL: Received PPTP Control Message (type: 15)
Apr 12 12:21:46 localhost pptpd[2870]: CTRL: Got a SET LINK INFO packet with standard ACCMs
Apr 12 12:21:46 localhost pptpd[2870]: GRE: Bad checksum from pppd.
Apr 12 12:21:46 localhost pptpd[2870]: GRE: accepting packet #1
Apr 12 12:21:46 localhost pptpd[2870]: GRE: accepting packet #2
Apr 12 12:21:46 localhost pptpd[2870]: GRE: accepting packet #3
Apr 12 12:21:46 localhost pptpd[2870]: CTRL: Received PPTP Control Message (type: 15)
Apr 12 12:21:46 localhost pptpd[2870]: CTRL: Ignored a SET LINK INFO packet with real ACCMs!
Apr 12 12:21:46 localhost pptpd[2870]: GRE: accepting packet #4
Apr 12 12:21:46 localhost pptpd[2870]: GRE: accepting packet #5
Apr 12 12:21:46 localhost pptpd[2870]: GRE: accepting packet #6
Apr 12 12:21:48 localhost pptpd[2870]: GRE: accepting packet #7
Apr 12 12:21:50 localhost pptpd[2870]: GRE: accepting packet #8
Apr 12 12:21:52 localhost pptpd[2870]: GRE: accepting packet #9
Apr 12 12:21:54 localhost pptpd[2870]: GRE: accepting packet #10
Apr 12 12:21:56 localhost pptpd[2870]: GRE: accepting packet #11
Apr 12 12:21:56 localhost pptpd[2870]: GRE: accepting packet #12
Apr 12 12:21:56 localhost pptpd[2870]: CTRL: Received PPTP Control Message (type: 15)
Apr 12 12:21:56 localhost pptpd[2870]: CTRL: Got a SET LINK INFO packet with standard ACCMs
Apr 12 12:21:56 localhost pptpd[2870]: CTRL: Received PPTP Control Message (type: 12)
Apr 12 12:21:56 localhost pptpd[2870]: CTRL: Made a CALL DISCONNECT RPLY packet
Apr 12 12:21:56 localhost pptpd[2870]: CTRL: Received CALL CLR request (closing call)
Apr 12 12:21:56 localhost pptpd[2870]: CTRL: Reaping child PPP[2871]
Apr 12 12:21:56 localhost pptpd[2870]: CTRL: Client 192.168.2.13 control connection finished
Apr 12 12:21:56 localhost pptpd[2870]: CTRL: Exiting now

Может кто поделится работающими конфигами и даст точную настройку клиентского VPN соединения. Буду очень признателен.

[ran]

ууу... как всё запущено...

Откуда взялся "Unknow server '255.255.255.255'"

откуда - откуда... отсюда:

NAS-IP-Address = 255.255.255.255

ты ж его в командной строке не указал... А ваще... почитай пожалуйста для начала мануалы. Все. От корки до корки. И не на каком-то там омск.ру, а на этом сайте. Да и форум полезно полистать... Тут мого чего интересссного есь... Без этого тебе даже работающие чужие конфиги не помогут. А настройки виндовозных клиентов... Скажу просто - если пптп, то как обычный впн, если пппое - как подключение через адсл модем. Зучай