Что такое?

[colortv]

[root@core /]# radiusd -X
Starting - reading configuration files ...
reread_config: reading radiusd.conf
Config: including file: /usr/etc/raddb/proxy.conf
Config: including file: /usr/etc/raddb/clients.conf
Config: including file: /usr/etc/raddb/snmp.conf
Config: including file: /usr/etc/raddb/eap.conf
Config: including file: /usr/etc/raddb/sql.conf
main: prefix = "/usr"
main: localstatedir = "/usr/var"
main: logdir = "/usr/var/log/radius"
main: libdir = "/usr/lib"
main: radacctdir = "/usr/var/log/radius/radacct"
main: hostname_lookups = no
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 0
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_file = "/usr/var/log/radius/radius.log"
main: log_auth = no
main: log_auth_badpass = no
main: log_auth_goodpass = no
main: pidfile = "/usr/var/run/radiusd/radiusd.pid"
main: user = "root"
main: group = "root"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/usr/sbin/checkrad"
main: proxy_requests = yes
proxy: retry_delay = 5
proxy: retry_count = 3
proxy: synchronous = no
proxy: default_fallback = yes
proxy: dead_time = 120
proxy: post_proxy_authorize = no
proxy: wake_all_if_all_dead = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files: reading dictionary
read_config_files: reading naslist
Using deprecated naslist file. Support for this will go away soon.
read_config_files: reading clients
read_config_files: reading realms
radiusd: entering modules setup
Module: Library search path is /usr/lib
Module: Loaded exec
exec: wait = yes
exec: program = "(null)"
exec: input_pairs = "request"
exec: output_pairs = "(null)"
exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
pap: encryption_scheme = "crypt"
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
mschap: use_mppe = yes
mschap: require_encryption = no
mschap: require_strong = no
mschap: with_ntdomain_hack = no
mschap: passwd = "(null)"
mschap: authtype = "MS-CHAP"
mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded System
unix: cache = no
unix: passwd = "(null)"
unix: shadow = "(null)"
unix: group = "(null)"
unix: radwtmp = "/usr/var/log/radius/radwtmp"
unix: usegroup = no
unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
eap: default_eap_type = "md5"
eap: timer_expire = 60
eap: ignore_unknown_eap_types = no
eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
gtc: challenge = "Password: "
gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
exec: wait = yes
exec: program = "/usr/abills/libexec/rauth.pl pre_auth"
exec: input_pairs = "request"
exec: output_pairs = "config"
exec: packet_type = "(null)"
Module: Instantiated exec (pre_auth)
Module: Loaded preprocess
preprocess: huntgroups = "/usr/etc/raddb/huntgroups"
preprocess: hints = "/usr/etc/raddb/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
realm: format = "suffix"
realm: delimiter = "@"
realm: ignore_default = no
realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded files
files: usersfile = "/usr/etc/raddb/users"
files: acctusersfile = "/usr/etc/raddb/acct_users"
files: preproxy_usersfile = "/usr/etc/raddb/preproxy_users"
files: compat = "no"
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded detail
detail: detailfile = "/usr/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
radutmp: filename = "/usr/var/log/radius/radutmp"
radutmp: username = "%{User-Name}"
radutmp: case_sensitive = yes
radutmp: check_with_nas = yes
radutmp: perm = 384
radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
exec: wait = yes
exec: program = "/usr/abills/libexec/rauth.pl post_auth"
exec: input_pairs = "request"
exec: output_pairs = "config"
exec: packet_type = "(null)"
Module: Instantiated exec (post_auth)
Listening on authentication *:1812
Listening on accounting *:1813
Ready to process requests.
rad_recv: Access-Request packet from host 127.0.0.1:32780, id=61, length=65
Service-Type = Framed-User
Framed-Protocol = PPP
User-Name = "slava"
Calling-Station-Id = "192.168.0.54"
NAS-IP-Address = 127.0.0.1
NAS-Port = 0
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
radius_xlat: '/usr/abills/libexec/rauth.pl pre_auth'
Exec-Program: /usr/abills/libexec/rauth.pl pre_auth
Exec-Program output: Auth-Type := Accept
Exec-Program-Wait: value-pairs: Auth-Type := Accept
Exec-Program: returned: 0
modcall[authorize]: module "pre_auth" returns ok for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
modcall[authorize]: module "mschap" returns noop for request 0
rlm_realm: No '@' in User-Name = "slava", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 0
users: Matched entry DEFAULT at line 215
modcall[authorize]: module "files" returns ok for request 0
modcall: leaving group authorize (returns ok) for request 0
rad_check_password: Found Auth-Type Accept
rad_check_password: Auth-Type = Accept, accepting the user
radius_xlat: '/usr/abills/libexec/rauth.pl'
Exec-Program: /usr/abills/libexec/rauth.pl
Exec-Program output: Reply-Message = "Unknow server '127.0.0.1'"
Exec-Program-Wait: value-pairs: Reply-Message = "Unknow server '127.0.0.1'"
Exec-Program: returned: 1
Found Post-Auth-Type
Processing the post-auth section of radiusd.conf
modcall: entering group REJECT for request 0
radius_xlat: '/usr/abills/libexec/rauth.pl post_auth'
Exec-Program: /usr/abills/libexec/rauth.pl post_auth
Exec-Program output:
Exec-Program: returned: 0
modcall[post-auth]: module "post_auth" returns ok for request 0
modcall: leaving group REJECT (returns ok) for request 0
Delaying request 0 for 1 seconds
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Sending Access-Reject of id 61 to 127.0.0.1 port 32780
Reply-Message = "Unknow server '127.0.0.1'"
Waking up in 4 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 61 with timestamp 45f7dd26
Nothing to do. Sleeping until we see a request.
rad_recv: Access-Request packet from host 127.0.0.1:32780, id=62, length=65
Service-Type = Framed-User
Framed-Protocol = PPP
User-Name = "slava"
Calling-Station-Id = "192.168.0.54"
NAS-IP-Address = 127.0.0.1
NAS-Port = 0
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 1
radius_xlat: '/usr/abills/libexec/rauth.pl pre_auth'
Exec-Program: /usr/abills/libexec/rauth.pl pre_auth
Exec-Program output: Auth-Type := Accept
Exec-Program-Wait: value-pairs: Auth-Type := Accept
Exec-Program: returned: 0
modcall[authorize]: module "pre_auth" returns ok for request 1
modcall[authorize]: module "preprocess" returns ok for request 1
modcall[authorize]: module "mschap" returns noop for request 1
rlm_realm: No '@' in User-Name = "slava", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 1
users: Matched entry DEFAULT at line 215
modcall[authorize]: module "files" returns ok for request 1
modcall: leaving group authorize (returns ok) for request 1
rad_check_password: Found Auth-Type Accept
rad_check_password: Auth-Type = Accept, accepting the user
radius_xlat: '/usr/abills/libexec/rauth.pl'
Exec-Program: /usr/abills/libexec/rauth.pl
Exec-Program output: Reply-Message = "Unknow server '127.0.0.1'"
Exec-Program-Wait: value-pairs: Reply-Message = "Unknow server '127.0.0.1'"
Exec-Program: returned: 1
Found Post-Auth-Type
Processing the post-auth section of radiusd.conf
modcall: entering group REJECT for request 1
radius_xlat: '/usr/abills/libexec/rauth.pl post_auth'
Exec-Program: /usr/abills/libexec/rauth.pl post_auth
Exec-Program output:
Exec-Program: returned: 0
modcall[post-auth]: module "post_auth" returns ok for request 1
modcall: leaving group REJECT (returns ok) for request 1
Delaying request 1 for 1 seconds
Finished request 1
Going to the next request
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Sending Access-Reject of id 62 to 127.0.0.1 port 32780
Reply-Message = "Unknow server '127.0.0.1'"
Waking up in 4 seconds...
--- Walking the entire request list ---
Cleaning up request 1 ID 62 with timestamp 45f7dd2f
Nothing to do. Sleeping until we see a request.