WAP4410N Wireless-N Access Point

Работа с серверами доступа Juniper, Cisco, Ericsson
Ответить
vector-ua
Сообщения: 9
Зарегистрирован: Чт ноя 08, 2012 5:08 pm

WAP4410N Wireless-N Access Point

Сообщение vector-ua » Чт ноя 08, 2012 5:20 pm

Добрый день

Есть сервер на FreeBSD с установленноым и настроенным ABillS 0.41b+freeradius2+mpd5+mysql
Сейчас есть сервер доступа на mpd к которому клиенты подключаются через pppoe
Все работает нормально.

У шефов организации возникла идея поставить точки доступа, закупили CISCO WAP4410N
Теперь у меня задача - к этому-же билингу подключить эту точку доступа, чтобы
клиенты проходили авторизацию логин+пароль, который они используют при подключении на pppoe сервер,

Вроде как это технология WPA2-Enterprise. Начал настраивать, прописал эту точку в файле raddb/clients.conf
но ничего не получается подсоединиться.
В присоединенном файле все типы авторизации которые поддерживает эта точка.

В какую сторону копать???
Вложения
scr-1.jpg
scr-1.jpg (92.84 КБ) 5915 просмотров
scr.jpg
scr.jpg (110.21 КБ) 5916 просмотров

~AsmodeuS~
Site Admin
Сообщения: 5604
Зарегистрирован: Пт янв 28, 2005 3:11 pm
Контактная информация:

Re: WAP4410N Wireless-N Access Point

Сообщение ~AsmodeuS~ » Чт ноя 08, 2012 9:24 pm

сначало показать радиус пары авториазции

radiusd -X

vector-ua
Сообщения: 9
Зарегистрирован: Чт ноя 08, 2012 5:08 pm

Re: WAP4410N Wireless-N Access Point

Сообщение vector-ua » Пт ноя 09, 2012 8:58 am

что конкретно из вывода необходимо?

~AsmodeuS~
Site Admin
Сообщения: 5604
Зарегистрирован: Пт янв 28, 2005 3:11 pm
Контактная информация:

Re: WAP4410N Wireless-N Access Point

Сообщение ~AsmodeuS~ » Пт ноя 09, 2012 3:33 pm

строчки запроса авторизации

vector-ua
Сообщения: 9
Зарегистрирован: Чт ноя 08, 2012 5:08 pm

Re: WAP4410N Wireless-N Access Point

Сообщение vector-ua » Пт ноя 09, 2012 3:56 pm

FreeRADIUS Version 2.2.0, for host amd64-portbld-freebsd7.4, built on Oct 18 2012 at 08:43:50
Copyright (C) 1999-2012 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /usr/local/etc/raddb/radiusd.conf
including configuration file /usr/local/etc/raddb/clients.conf
including files in directory /usr/local/etc/raddb/modules/
including configuration file /usr/local/etc/raddb/modules/wimax
including configuration file /usr/local/etc/raddb/modules/always
including configuration file /usr/local/etc/raddb/modules/attr_filter
including configuration file /usr/local/etc/raddb/modules/attr_rewrite
including configuration file /usr/local/etc/raddb/modules/chap
including configuration file /usr/local/etc/raddb/modules/checkval
including configuration file /usr/local/etc/raddb/modules/counter
including configuration file /usr/local/etc/raddb/modules/detail
including configuration file /usr/local/etc/raddb/modules/detail.example.com
including configuration file /usr/local/etc/raddb/modules/detail.log
including configuration file /usr/local/etc/raddb/modules/digest
including configuration file /usr/local/etc/raddb/modules/echo
including configuration file /usr/local/etc/raddb/modules/etc_group
including configuration file /usr/local/etc/raddb/modules/exec
including configuration file /usr/local/etc/raddb/modules/expiration
including configuration file /usr/local/etc/raddb/modules/expr
including configuration file /usr/local/etc/raddb/modules/files
including configuration file /usr/local/etc/raddb/modules/inner-eap
including configuration file /usr/local/etc/raddb/modules/ippool
including configuration file /usr/local/etc/raddb/modules/krb5
including configuration file /usr/local/etc/raddb/modules/ldap
including configuration file /usr/local/etc/raddb/modules/linelog
including configuration file /usr/local/etc/raddb/modules/logintime
including configuration file /usr/local/etc/raddb/modules/mac2ip
including configuration file /usr/local/etc/raddb/modules/mac2vlan
including configuration file /usr/local/etc/raddb/modules/mschap
including configuration file /usr/local/etc/raddb/modules/otp
including configuration file /usr/local/etc/raddb/modules/pam
including configuration file /usr/local/etc/raddb/modules/pap
including configuration file /usr/local/etc/raddb/modules/passwd
including configuration file /usr/local/etc/raddb/modules/perl
including configuration file /usr/local/etc/raddb/modules/policy
including configuration file /usr/local/etc/raddb/modules/preprocess
including configuration file /usr/local/etc/raddb/modules/radutmp
including configuration file /usr/local/etc/raddb/modules/realm
including configuration file /usr/local/etc/raddb/modules/smbpasswd
including configuration file /usr/local/etc/raddb/modules/smsotp
including configuration file /usr/local/etc/raddb/modules/sql_log
including configuration file /usr/local/etc/raddb/modules/sqlcounter_expire_on_login
including configuration file /usr/local/etc/raddb/modules/sradutmp
including configuration file /usr/local/etc/raddb/modules/unix
including configuration file /usr/local/etc/raddb/modules/acct_unique
including configuration file /usr/local/etc/raddb/eap.conf
including configuration file /usr/local/etc/raddb/policy.conf
including files in directory /usr/local/etc/raddb/sites-enabled/
including configuration file /usr/local/etc/raddb/sites-enabled/default
including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel
including configuration file /usr/local/etc/raddb/sites-enabled/control-socket
main {
user = "freeradius"
group = "freeradius"
allow_core_dumps = no
}
including dictionary file /usr/local/etc/raddb/dictionary
main {
name = "radiusd"
prefix = "/usr/local"
localstatedir = "/var"
sbindir = "/usr/local/sbin"
logdir = "/var/log"
run_dir = "/var/run/radiusd"
libdir = "/usr/local/lib/freeradius-2.2.0"
radacctdir = "/var/log/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/local/sbin/checkrad"
debug_level = 0
proxy_requests = no
log {
stripped_names = no
auth = yes
auth_badpass = yes
auth_goodpass = yes
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "radiusclientuser"
nastype = "other"
}
client 172.30.0.0/24 {
require_message_authenticator = no
secret = "radiusclientuser"
nastype = "other"
}
client 172.19.255.32 {
require_message_authenticator = no
secret = "radiusclientuser"
nastype = "cisco"
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating module "exec" from file /usr/local/etc/raddb/modules/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
}
Module: Linked to module rlm_expr
Module: Instantiating module "expr" from file /usr/local/etc/raddb/modules/expr
Module: Linked to module rlm_expiration
Module: Instantiating module "expiration" from file /usr/local/etc/raddb/modules/expiration
expiration {
reply-message = "Password Has Expired "
}
Module: Linked to module rlm_logintime
Module: Instantiating module "logintime" from file /usr/local/etc/raddb/modules/logintime
logintime {
reply-message = "You are calling outside your allowed timespan "
minimum-timeout = 60
}
}
radiusd: #### Loading Virtual Servers ####
server { # from file /usr/local/etc/raddb/radiusd.conf
modules {
Module: Creating Post-Auth-Type = REJECT
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating module "pap" from file /usr/local/etc/raddb/modules/pap
pap {
encryption_scheme = "auto"
auto_header = no
}
Module: Linked to module rlm_chap
Module: Instantiating module "chap" from file /usr/local/etc/raddb/modules/chap
Module: Linked to module rlm_mschap
Module: Instantiating module "mschap" from file /usr/local/etc/raddb/modules/mschap
mschap {
use_mppe = yes
require_encryption = yes
require_strong = yes
with_ntdomain_hack = no
allow_retry = yes
}
Module: Linked to module rlm_unix
Module: Instantiating module "unix" from file /usr/local/etc/raddb/modules/unix
unix {
radwtmp = "/var/log/radwtmp"
}
Module: Linked to module rlm_eap
Module: Instantiating module "eap" from file /usr/local/etc/raddb/eap.conf
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 2048
}
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_leap
Module: Instantiating eap-leap
Module: Linked to sub-module rlm_eap_gtc
Module: Instantiating eap-gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
Module: Linked to sub-module rlm_eap_tls
Module: Instantiating eap-tls
tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
pem_file_type = yes
private_key_file = "/usr/local/etc/raddb/certs/server.pem"
certificate_file = "/usr/local/etc/raddb/certs/server.pem"
CA_file = "/usr/local/etc/raddb/certs/ca.pem"
private_key_password = "whatever"
dh_file = "/usr/local/etc/raddb/certs/dh"
random_file = "/usr/local/etc/raddb/certs/random"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
make_cert_command = "/usr/local/etc/raddb/certs/bootstrap"
ecdh_curve = "prime256v1"
cache {
enable = no
lifetime = 24
max_entries = 255
}
}
Module: Linked to sub-module rlm_eap_ttls
Module: Instantiating eap-ttls
ttls {
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
}
Module: Linked to sub-module rlm_eap_peap
Module: Instantiating eap-peap
peap {
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
}
Module: Linked to sub-module rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating module "preprocess" from file /usr/local/etc/raddb/modules/preprocess
preprocess {
huntgroups = "/usr/local/etc/raddb/huntgroups"
hints = "/usr/local/etc/raddb/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
reading pairlist file /usr/local/etc/raddb/huntgroups
reading pairlist file /usr/local/etc/raddb/hints
Module: Instantiating module "abills_preauth" from file /usr/local/etc/raddb/radiusd.conf
exec abills_preauth {
wait = yes
program = "/usr/local/abills/libexec/rauth.pl pre_auth"
input_pairs = "request"
output_pairs = "config"
shell_escape = yes
}
Module: Linked to module rlm_files
Module: Instantiating module "files" from file /usr/local/etc/raddb/modules/files
files {
usersfile = "/usr/local/etc/raddb/users"
acctusersfile = "/usr/local/etc/raddb/acct_users"
preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
compat = "no"
}
reading pairlist file /usr/local/etc/raddb/users
reading pairlist file /usr/local/etc/raddb/acct_users
reading pairlist file /usr/local/etc/raddb/preproxy_users
Module: Instantiating module "abills_auth" from file /usr/local/etc/raddb/radiusd.conf
exec abills_auth {
wait = yes
program = "/usr/local/abills/libexec/rauth.pl"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
Module: Checking preacct {...} for more modules to load
Module: Instantiating module "abills_acc" from file /usr/local/etc/raddb/radiusd.conf
exec abills_acc {
wait = yes
program = "/usr/local/abills/libexec/racct.pl"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
Module: Checking accounting {...} for more modules to load
Module: Linked to module rlm_detail
Module: Instantiating module "detail" from file /usr/local/etc/raddb/modules/detail
detail {
detailfile = "/var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Linked to module rlm_radutmp
Module: Instantiating module "radutmp" from file /usr/local/etc/raddb/modules/radutmp
radutmp {
filename = "/var/log/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Linked to module rlm_attr_filter
Module: Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/modules/attr_filter
attr_filter attr_filter.accounting_response {
attrsfile = "/usr/local/etc/raddb/attrs.accounting_response"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /usr/local/etc/raddb/attrs.accounting_response
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Instantiating module "abills_postauth" from file /usr/local/etc/raddb/radiusd.conf
exec abills_postauth {
wait = yes
program = "/usr/local/abills/libexec/rauth.pl post_auth"
input_pairs = "request"
output_pairs = "config"
shell_escape = yes
}
} # modules
} # server
server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel
modules {
Module: Checking authenticate {...} for more modules to load
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_realm
Module: Instantiating module "suffix" from file /usr/local/etc/raddb/modules/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/modules/attr_filter
attr_filter attr_filter.access_reject {
attrsfile = "/usr/local/etc/raddb/attrs.access_reject"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /usr/local/etc/raddb/attrs.access_reject
} # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0

vector-ua
Сообщения: 9
Зарегистрирован: Чт ноя 08, 2012 5:08 pm

Re: WAP4410N Wireless-N Access Point

Сообщение vector-ua » Вт ноя 13, 2012 7:40 am

Прошу помощи - сам не могу разобраться. :(

~AsmodeuS~
Site Admin
Сообщения: 5604
Зарегистрирован: Пт янв 28, 2005 3:11 pm
Контактная информация:

Re: WAP4410N Wireless-N Access Point

Сообщение ~AsmodeuS~ » Пн ноя 26, 2012 9:15 am

ві показали только дебаг загрузки радиуса

а нужно парі атворизации

vector-ua
Сообщения: 9
Зарегистрирован: Чт ноя 08, 2012 5:08 pm

Re: WAP4410N Wireless-N Access Point

Сообщение vector-ua » Вт ноя 27, 2012 7:48 am

где их посмотреть?

я показал вывод команды radiusd -X

~AsmodeuS~
Site Admin
Сообщения: 5604
Зарегистрирован: Пт янв 28, 2005 3:11 pm
Контактная информация:

Re: WAP4410N Wireless-N Access Point

Сообщение ~AsmodeuS~ » Вт ноя 27, 2012 10:07 am

запрос к точке нужно сделать и должны появится пары атворизации

vector-ua
Сообщения: 9
Зарегистрирован: Чт ноя 08, 2012 5:08 pm

Re: WAP4410N Wireless-N Access Point

Сообщение vector-ua » Чт ноя 29, 2012 3:22 pm

как???

~AsmodeuS~
Site Admin
Сообщения: 5604
Зарегистрирован: Пт янв 28, 2005 3:11 pm
Контактная информация:

Re: WAP4410N Wireless-N Access Point

Сообщение ~AsmodeuS~ » Пт ноя 30, 2012 8:21 am

авторизироваться на точке

Ответить