Использую связку FreeBSD 7.3-RELEASE, freeradius1, mpd5(pppoe)
Периодически падает сервер. Иногда сам уходит в перезагрузку, а сегодня тупо завис и даже не перезагрузился (пришлось мотать 250км)
Прошу Вас помочь мне.
В логах ничего критического не нашел (плохо искал)
в папке /var/crash
файл info.7
Код: Выделить всё
Dump header from device /dev/ad4s1b
Architecture: i386
Architecture Version: 2
Dump Length: 157208576B (149 MB)
Blocksize: 512
Dumptime: Sat Jul 28 20:08:50 2012
Hostname: localhost
Magic: FreeBSD Kernel Dump
Version String: FreeBSD 7.3-RELEASE #0: Tue Nov 9 22:27:57 EET 2010
admin@localhost:/usr/src/sys/i386/compile/ABILLS
Panic String: page fault
Dump Parity: 3301271809
Bounds: 7
Dump Status: good
Код: Выделить всё
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.3-RELEASE #0: Tue Nov 9 22:27:57 EET 2010
admin@localhost:/usr/src/sys/i386/compile/ABILLS i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.06GHz (3065.82-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4400<CNXT-ID,xTPR>
Logical CPUs per core: 2
real memory = 939499520 (895 MB)
avail memory = 905568256 (863 MB)
ACPI APIC Table: <COMPAQ 00000083>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP/HT): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic1: Changing APIC ID to 3
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
kbd1 at kbdmux0
acpi0: <COMPAQ D13> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x920-0x923 on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
atapci0: <SiI CMD 649 UDMA100 controller> port 0x2010-0x2017,0x2018-0x201b,0x2020-0x2027,0x2028-0x202b,0x2030-0x203f irq 17 at device 2.0 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
vgapci0: <VGA-compatible display> port 0x2400-0x24ff mem 0xf7000000-0xf7ffffff,0xf6ff0000-0xf6ff0fff at device 3.0 on pci0
pci0: <base peripheral> at device 4.0 (no driver attached)
bge0: <Compaq NC7760 Gigabit Server Adapter, ASIC rev. 0x001002> mem 0xf6fd0000-0xf6fdffff irq 19 at device 5.0 on pci0
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: Ethernet address: 00:0f:20:d1:c8:0c
bge0: [ITHREAD]
bge1: <Compaq NC7760 Gigabit Server Adapter, ASIC rev. 0x001002> mem 0xf6fc0000-0xf6fcffff irq 20 at device 6.0 on pci0
miibus1: <MII bus> on bge1
brgphy1: <BCM5703 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge1: Ethernet address: 00:0f:20:d1:b8:fb
bge1: [ITHREAD]
isab0: <PCI-ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <ServerWorks CSB6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2000-0x200f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci1
ata1: [ITHREAD]
pci0: <serial bus, USB> at device 15.2 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xee000-0xeffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
IP Filter: v4.1.28 initialized. Default = pass all, Logging = disabled
ipfw2 initialized, divert enabled, nat enabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default
acd0: CDROM <CD-224E/9.9A> at ata0-master PIO4
ad4: DMA limited to UDMA33, device found non-ATA66 cable
ad4: 76319MB <Maxtor 6Y080L0 YAR41BW0> at ata2-master UDMA33
ar0: 76317MB <LSILogic v2 MegaRAID RAID0 (stripe 64 KB)> status: READY
ar0: disk0 READY using ad4 at ata2-master
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad4s1a
<118>Loading configuration files.
<118>kernel dumps on /dev/ad4s1b
<118>Entropy harvesting:
<118> interrupts
<118> ethernet
<118> point_to_point
<118> kickstart
<118>.
<118>swapon: adding /dev/ad4s1b as swap device
<118>Starting file system checks:
<118>/dev/ad4s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
<118>/dev/ad4s1a: clean, 73374 free (3102 frags, 8784 blocks, 1.2% fragmentation)
<118>/dev/ad4s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS
<118>/dev/ad4s1e: clean, 506010 free (50 frags, 63245 blocks, 0.0% fragmentation)
<118>/dev/ad4s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS
<118>/dev/ad4s1f: clean, 11029584 free (63408 frags, 1370772 blocks, 0.5% fragmentation)
<118>/dev/ad4s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
<118>/dev/ad4s1d: clean, 534389 free (3245 frags, 66393 blocks, 0.2% fragmentation)
<118>Setting hostuuid: 44454c4c-3300-104e-8053-b7c04f52304a.
<118>Setting hostid: 0x109defb2.
<118>Mounting local file systems:
<118>.
<118>Setting hostname: localhost.
<118>lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
<118> inet 127.0.0.1 netmask 0xff000000
<118>bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118> options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
<118> ether 00:0f:20:d1:c8:0c
<118> inet 178.211.25.58 netmask 0xffffff80 broadcast 91.215.25.127
<118> media: Ethernet autoselect (none)
<118> status: no carrier
<118>bge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118> options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
<118> ether 00:0f:20:d1:b8:fb
<118> inet 10.4.0.250 netmask 0xffffff00 broadcast 10.4.0.255
<118> inet 10.180.1.33 netmask 0xffffff00 broadcast 10.180.1.255
<118> media: Ethernet autoselect (none)
<118> status: no carrier
<118>add net default: gateway 178.211.25.126
<118>Additional routing options:
<118> IP gateway=YES
<118>.
<118>Starting devd.
<118>hw.acpi.cpu.cx_lowest:
<118>C1
<118> ->
<118>C1
<118>
<118>Flushed all rules.
<118>00100 allow ip from any to any via lo0
<118>00200 deny ip from any to 127.0.0.0/8
<118>00300 deny ip from 127.0.0.0/8 to any
<118>Firewall rules loaded.
<118>net.inet.ip.fw.enable:
<118>1
<118> ->
<118>1
<118>
<118>Additional IP options:
<118>.
<118>Mounting NFS file systems:
<118>.
<118>ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/mysql
<118>a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
<118>Creating and/or trimming log files:
<118>.
<118>Starting syslogd.
<118>Checking for core dump on /dev/ad4s1b...
<118>No core dumps found
<118>Initial i386 initialization:
<118>.
<118>Additional ABI support:
<118>.
<118>Clearing /tmp (X related).
<118>Starting mpd5.
<5>bge0: link state changed to UP
<5>bge1: link state changed to UP
<118>Starting local daemons:
<118>ipfw nat 1 config if bge0 log same_ports reset
<118>01200 nat 1 ip from table(2) to any via bge0
WARNING: attempt to net_add_domain(netgraph) after domainfinalize()
<118>01300 nat 1 ip from any to 178.211.25.58 via bge0
<118>.
<118>Updating motd
<118>.
<118>Mounting late file systems:
<118>.
<118>Starting ntpd.
<118>Starting webmin.
<118>Starting Webmin server in /usr/local/lib/webmin-1.590
<118>Pre-loaded WebminCore
<118>Starting mysql.
<118>Starting radiusd.
<118>Sat Jul 28 17:33:55 2012 : Info: Starting - reading configuration files ...
<118>Performing sanity check on apache22 configuration:
<118>Syntax OK
<118>Starting apache22.
<118>Configuring syscons:
<118> keymap
<118> keyrate
<118> scrnmap
<118> font8x16
<118> font8x14
<118> font8x8
<118> blanktime
<118> screensaver
<118>.
<118>Starting sshd.
<118>Starting cron.
<118>Local package initialization:
<118>start
<118>ng_car shapper
module_register: module ng_ether already exists!
Module ng_ether failed to register: 17
<118>kldload:
<118>can't load ng_ether
<118>:
<118>File exists
<118>Traffic: 2
<118>09980 skipto 10120 ip from table(12) to table(2) in recv ng*
<118>09985 skipto 10125 ip from table(2) to table(13) out xmit ng*
<118>10120 netgraph tablearg ip from table(12) to any in recv ng*
<118>10125 netgraph tablearg ip from any to table(13) out xmit ng*
<118>10220 allow ip from table(9) to table(2) in recv ng*
<118>10225 allow ip from table(2) to table(9) out xmit ng*
<118>Traffic: 3
<118>09970 skipto 10130 ip from table(14) to table(3) in recv ng*
<118>09975 skipto 10135 ip from table(3) to table(15) out xmit ng*
<118>10130 netgraph tablearg ip from table(14) to any in recv ng*
<118>10135 netgraph tablearg ip from any to table(15) out xmit ng*
<118>10230 allow ip from table(9) to table(3) in recv ng*
<118>10235 allow ip from table(3) to table(9) out xmit ng*
<118>Global shaper
<118>10000 netgraph tablearg ip from table(10) to any in recv ng*
<118>10010 netgraph tablearg ip from any to table(11) out xmit ng*
<118>10020 allow ip from table(9) to any in recv ng*
<118>10025 allow ip from any to table(9) out xmit ng*
<118>08801 fwd 127.0.0.1,80 tcp from table(32) to any dst-port 80 via ng*
<118>08811 allow ip from table(32) to 195.182.119.10 dst-port 53 via ng*
<118>08811 allow ip from table(32) to 195.182.192.2 dst-port 53 via ng*
<118>08831 deny ip from table(32) to any via ng*
<118>.
<118>Starting background file system checks in 60 seconds.
<118>
<118>Sat Jul 28 17:33:59 EEST 2012
<118>Jul 28 17:35:16 localhost su: admin to root on /dev/ttyp0
<5>bge1: link state changed to DOWN
<5>bge1: link state changed to UP
<5>bge1: link state changed to DOWN
<5>bge1: link state changed to UP
<5>bge1: link state changed to DOWN
<5>bge1: link state changed to UP
<118>Jul 28 17:40:01 localhost sendmail[2199]: My unqualified host name (localhost) unknown; sleeping for retry
<118>Jul 28 17:41:01 localhost sendmail[2199]: unable to qualify my own domain name (localhost) -- using short name
<118>Jul 28 17:45:00 localhost sendmail[2772]: My unqualified host name (localhost) unknown; sleeping for retry
<118>Jul 28 17:46:00 localhost sendmail[2772]: unable to qualify my own domain name (localhost) -- using short name
<118>Jul 28 17:50:00 localhost sendmail[3173]: My unqualified host name (localhost) unknown; sleeping for retry
<118>Jul 28 17:51:00 localhost sendmail[3173]: unable to qualify my own domain name (localhost) -- using short name
<118>Jul 28 17:55:01 localhost sendmail[3366]: My unqualified host name (localhost) unknown; sleeping for retry
<118>Jul 28 17:56:01 localhost sendmail[3366]: unable to qualify my own domain name (localhost) -- using short name
<5>bge1: link state changed to DOWN
<5>bge1: link state changed to UP
<5>bge1: link state changed to DOWN
<5>bge1: link state changed to UP
<5>bge1: link state changed to DOWN
<5>bge1: link state changed to UP
<5>bge1: link state changed to DOWN
<5>bge1: link state changed to UP
<5>bge1: link state changed to DOWN
<5>bge1: link state changed to UP
<5>bge1: link state changed to DOWN
<5>bge1: link state changed to UP
<118>Jul 28 18:59:41 localhost su: admin to root on /dev/ttyp1
<118>Jul 28 19:46:38 localhost sendmail[11803]: My unqualified host name (localhost) unknown; sleeping for retry
<118>Jul 28 19:47:38 localhost sendmail[11803]: unable to qualify my own domain name (localhost) -- using short name
<118>Jul 28 19:52:15 localhost su: admin to root on /dev/ttyp2
Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address = 0xc
fault code = supervisor read, page not present
instruction pointer = 0x20:0xc0766fe6
stack pointer = 0x28:0xc3dfaa50
frame pointer = 0x28:0xc3dfaa7c
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 27 (irq19: bge0)
trap number = 12
panic: page fault
cpuid = 0
Uptime: 2h35m10s
Physical memory: 883 MB
Dumping 149 MB:Код: Выделить всё
apache-2.2.17_1 Version 2.2.x of Apache web server with prefork MPM.
apr-ipv6-devrandom-gdbm-db42-1.4.2.1.3.10 Apache Portability Library
autoconf-2.68 Automatically configure source code on many Un*x platforms
autoconf-wrapper-20071109 Wrapper script for GNU autoconf
automake-1.11.1 GNU Standards-compliant Makefile generator (1.11)
automake-wrapper-20071109 Wrapper script for GNU automake
bdftopcf-1.0.2 Convert X font from BDF to PCF
bigreqsproto-1.1.0 BigReqs extension headers
bison-2.4.3,1 A parser generator from FSF, (mostly) compatible with Yacc
bitstream-vera-1.10_4 Bitstream Vera TrueType font collection
bsdpan-Compress-Raw-Bzip2-2.052 Compress::Raw::Bzip2 - Low-Level Interface to bzip2 compres
bsdpan-Compress-Raw-Zlib-2.054 Compress::Raw::Zlib - Low-Level Interface to zlib compressi
bsdpan-DBD-mysql-4.018 DBD::mysql - MySQL driver for the Perl5 Database Interface
bsdpan-DBI-1.615 DBI - Database independent interface for Perl
bsdpan-Digest-MD5-2.51 Digest::MD5 - Perl interface to the MD5 Algorithm
bsdpan-Font-TTF-0.48 Font::TTF - Perl module for TrueType Font hacking
bsdpan-IO-Compress-2.052 IO::Compress::Base - Base Class for IO::Compress modules
bsdpan-PDF-API2-2.019 PDF::API2 - Facilitates the creation and modification of PD
bsdpan-Test-Simple-0.96 Test::Simple - Basic utilities for writing tests.
bsdpan-Time-HiRes-1.9721 Time::HiRes - High resolution alarm, sleep, gettimeofday, i
cairo-1.8.10_1,1 Vector graphics library with cross-device output support
cvsup-without-gui-16.1h_4 File distribution system optimized for CVS (non-GUI version
db42-4.2.52_5 The Berkeley DB package, revision 4.2
encodings-1.0.3,1 X.Org Encoding fonts
expat-2.0.1_1 XML 1.0 parser written in C
ezm3-1.2_1 Easier, more portable Modula-3 distribution for building CV
font-bh-ttf-1.0.1 X.Org Bigelow & Holmes TTF font
font-misc-ethiopic-1.0.1 X.Org miscellaneous Ethiopic font
font-misc-meltho-1.0.1 X.Org miscellaneous Meltho font
font-util-1.0.2 Create an index of X font files in a directory
fontconfig-2.8.0,1 An XML-based font configuration API for X Windows
fontsproto-2.1.0 Fonts extension headers
freeradius-1.1.8_1 A free RADIUS server implementation
freetype2-2.4.2 A free and portable TrueType font rendering engine
gamin-0.1.10_3 A file and directory monitoring system
gdbm-1.8.3_3 The GNU database manager
gettext-0.17_1 GNU gettext package
gio-fam-backend-2.22.4 FAM backend for GLib's GIO library
glib-2.22.4 Some useful routines of C programming (current stable versi
gmake-3.81_4 GNU version of 'make' utility
gobject-introspection-0.6.14 Generate interface introspection data for GObject libraries
gperf-3.0.3 Generates perfect hash functions for sets of keywords
help2man-1.38.2_1 Automatically generating simple manual pages from program o
inputproto-2.0 Input extension headers
intltool-0.40.6 Tools to internationalize various kinds of data files
jpeg-8_3 IJG's jpeg compression utilities
kbproto-1.0.4 KB extension headers
libICE-1.0.6,1 Inter Client Exchange library for X11
libSM-1.1.1_3,1 Session Management library for X11
libX11-1.3.3_1,1 X11 library
libXau-1.0.5 Authentication Protocol library for X11
libXaw-1.0.7,1 X Athena Widgets library
libXdmcp-1.0.3 X Display Manager Control Protocol library
libXext-1.1.1,1 X11 Extension library
libXfont-1.4.0,1 X font libary
libXft-2.1.14 A client-sided font API for X applications
libXmu-1.0.5,1 X Miscellaneous Utilities libraries
libXp-1.0.0,1 X print library
libXpm-3.5.7 X Pixmap library
libXrender-0.9.5 X Render extension library
libXt-1.0.7 X Toolkit library
libcheck-0.9.8 A unit test framework for C
libffi-3.0.9 Foreign Function Interface
libfontenc-1.0.5 The fontenc Library
libgcrypt-1.4.6 General purpose crypto library based on code used in GnuPG
libgpg-error-1.8 Common error values for all GnuPG components
libiconv-1.13.1_1 A character set conversion library
libltdl-2.2.10 System independent dlopen wrapper
libmcrypt-2.5.8 Multi-cipher cryptographic library (used in PHP)
libpdel-0.5.3_4 Packet Design multi-purpose C library for embedded applicat
libpthread-stubs-0.3_3 This library provides weak aliases for pthread functions
libslang2-2.2.2 Routines for rapid alpha-numeric terminal applications deve
libtool-2.2.10 Generic shared library support script
libxcb-1.7 The X protocol C-language Binding (XCB) library
libxml2-2.7.7 XML parser library for GNOME
libxslt-1.1.26_2 The XSLT C library for GNOME
linux_base-fc-4_15 Base set of packages needed in Linux mode (for i386/amd64)
m4-1.4.15,1 GNU m4
mc-4.7.0.2_1 Midnight Commander, a free Norton Commander Clone
mkfontdir-1.0.5 Create an index of X font files in a directory
mkfontscale-1.0.7 Creates an index of scalable font files for X
mpd-5.5 Multi-link PPP daemon based on netgraph(4)
mysql-client-5.1.52 Multithreaded SQL database (client)
mysql-server-5.1.52 Multithreaded SQL database (server)
neon29-0.29.4 An HTTP and WebDAV client library for Unix systems
ntp-4.2.6p1.r5 The Network Time Protocol Distribution
oniguruma-4.7.1 A BSDL Regular Expressions library compatible with POSIX/GN
p5-Authen-PAM-0.16_1 A Perl interface to the PAM library
p5-ExtUtils-CBuilder-0.2703,1 Compile and link C code for Perl modules
p5-ExtUtils-Install-1.54 Perl extension to install files from here to there
p5-ExtUtils-ParseXS-2.22.03 Converts Perl XS code into C code
p5-Locale-gettext-1.05_3 Message handling functions
p5-Module-Build-0.3607_1 Build and install Perl modules
p5-Net-SSLeay-1.36 Perl5 interface to SSL
p5-RRD-Simple-1.44_3 Simple interface to create and store data in RRD files
p5-Test-Harness-3.22 Run perl standard test scripts with statistics
p5-XML-Parser-2.40 Perl extension interface to James Clark's XML parser, expat
p5-YAML-Tiny-1.44 Read/Write YAML files with as little code as possible
pango-1.28.1 An open-source framework for the layout and rendering of i1
pcre-8.00 Perl Compatible Regular Expressions library
pdflib-7.0.4 A C library for dynamically generating PDF
pecl-pdflib-2.1.8 A PECL extension to create PDF on the fly
perl-5.8.9_4 Practical Extraction and Report Language
php5-5.3.3_2 PHP Scripting Language
php5-bz2-5.3.3_2 The bz2 shared extension for php
php5-ctype-5.3.3_2 The ctype shared extension for php
php5-filter-5.3.3_2 The filter shared extension for php
php5-gd-5.3.3_2 The gd shared extension for php
php5-mbstring-5.3.3_2 The mbstring shared extension for php
php5-mcrypt-5.3.3_2 The mcrypt shared extension for php
php5-mysql-5.3.3_2 The mysql shared extension for php
php5-openssl-5.3.3_2 The openssl shared extension for php
php5-session-5.3.3_2 The session shared extension for php
php5-zip-5.3.3_2 The zip shared extension for php
php5-zlib-5.3.3_2 The zlib shared extension for php
phpMyAdmin-3.3.8 A set of PHP-scripts to manage MySQL over the web
pixman-0.16.6 Low-level pixel manipulation library
pkg-config-0.23_1 A utility to retrieve information about installed libraries
png-1.4.3 Library for manipulating PNG images
printproto-1.0.4 Print extension headers
python26-2.6.4 An interpreted object-oriented programming language
renderproto-0.11 RenderProto protocol headers
rrdtool-1.4.4 Round Robin Database Tools
sqlite3-3.7.3 An SQL database engine in a C library
subversion-1.6.13 Version control system
sudo-1.7.4.4_1 Allow others to run commands as root
t1lib-5.1.2_1,1 A Type 1 Rasterizer Library for UNIX/X11
tcl-8.5.9 Tool Command Language
tcl-modules-8.5.9 Tcl common modules
webmin-1.520 Web-based interface for system administration for Unix
xcb-proto-1.6 The X protocol C-language Binding (XCB) protocol
xcb-util-0.3.6_1 A module with libxcb/libX11 extension/replacement libraries
xcmiscproto-1.2.0 XCMisc extension headers
xextproto-7.1.1 XExt extension headers
xf86bigfontproto-1.2.0 XFree86-Bigfont extension headers
xorg-fonts-truetype-7.5 X.Org TrueType fonts
xorg-macros-1.6.0 X.Org development aclocal macros
xproto-7.0.16 X11 protocol headers
xtrans-1.2.5 Abstract network code for X
xz-4.999.9_1 LZMA compression and decompression tools