abills.net.ua

Код: Выделить всё

radtest test 123456 127.0.0.1:1812 0 radsecret 0 127.0.0.1
Sending Access-Request of id 88 to 127.0.0.1 port 1812
        User-Name = "test"
        User-Password = "123456"
        NAS-IP-Address = 127.0.0.1
        NAS-Port = 0
        Framed-Protocol = PPP
Sending Access-Request of id 88 to 127.0.0.1 port 1812
        User-Name = "test"
        User-Password = "123456"
        NAS-IP-Address = 127.0.0.1
        NAS-Port = 0
        Framed-Protocol = PPP
Sending Access-Request of id 88 to 127.0.0.1 port 1812
        User-Name = "test"
        User-Password = "123456"
        NAS-IP-Address = 127.0.0.1
        NAS-Port = 0
        Framed-Protocol = PPP
radclient: no response from server for ID 88 socket 3

Код: Выделить всё

В /etc/network/interfaces прописал
auto lo
iface lo inet loopback

auto eth1
iface eth1 inet static
address 192.168.1.5
netmask 255.255.255.0

Вернул все как было, без разницы

Код: Выделить всё

k# /usr/local/freeradius/sbin/radiusd -X               FreeRADIUS Version 2.1.11, for host x86_64-unknown-linux-gnu, built on Mar 28 2012 at 03:18:37
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /usr/local/freeradius/etc/raddb/radiusd.conf
including configuration file /usr/local/freeradius/etc/raddb/clients.conf
including files in directory /usr/local/freeradius/etc/raddb/modules/
including configuration file /usr/local/freeradius/etc/raddb/modules/radutmp
including configuration file /usr/local/freeradius/etc/raddb/modules/wimax
including configuration file /usr/local/freeradius/etc/raddb/modules/sql_log
including configuration file /usr/local/freeradius/etc/raddb/modules/mac2ip
including configuration file /usr/local/freeradius/etc/raddb/modules/always
including configuration file /usr/local/freeradius/etc/raddb/modules/echo
including configuration file /usr/local/freeradius/etc/raddb/modules/replicate
including configuration file /usr/local/freeradius/etc/raddb/modules/expiration
including configuration file /usr/local/freeradius/etc/raddb/modules/smsotp
including configuration file /usr/local/freeradius/etc/raddb/modules/ippool
including configuration file /usr/local/freeradius/etc/raddb/modules/logintime
including configuration file /usr/local/freeradius/etc/raddb/modules/preprocess
including configuration file /usr/local/freeradius/etc/raddb/modules/dynamic_clients
including configuration file /usr/local/freeradius/etc/raddb/modules/sqlcounter_expire_on_login
including configuration file /usr/local/freeradius/etc/raddb/modules/unix
including configuration file /usr/local/freeradius/etc/raddb/modules/detail.log
including configuration file /usr/local/freeradius/etc/raddb/modules/soh
including configuration file /usr/local/freeradius/etc/raddb/modules/detail
including configuration file /usr/local/freeradius/etc/raddb/modules/realm
including configuration file /usr/local/freeradius/etc/raddb/modules/checkval
including configuration file /usr/local/freeradius/etc/raddb/modules/detail.example.com
including configuration file /usr/local/freeradius/etc/raddb/modules/mac2vlan
including configuration file /usr/local/freeradius/etc/raddb/modules/opendirectory
including configuration file /usr/local/freeradius/etc/raddb/modules/digest
including configuration file /usr/local/freeradius/etc/raddb/modules/expr
including configuration file /usr/local/freeradius/etc/raddb/modules/smbpasswd
including configuration file /usr/local/freeradius/etc/raddb/modules/pam
including configuration file /usr/local/freeradius/etc/raddb/modules/krb5
including configuration file /usr/local/freeradius/etc/raddb/modules/cui
including configuration file /usr/local/freeradius/etc/raddb/modules/pap
including configuration file /usr/local/freeradius/etc/raddb/modules/attr_filter
including configuration file /usr/local/freeradius/etc/raddb/modules/linelog
including configuration file /usr/local/freeradius/etc/raddb/modules/counter
including configuration file /usr/local/freeradius/etc/raddb/modules/ldap
including configuration file /usr/local/freeradius/etc/raddb/modules/inner-eap
including configuration file /usr/local/freeradius/etc/raddb/modules/policy
including configuration file /usr/local/freeradius/etc/raddb/modules/redis
including configuration file /usr/local/freeradius/etc/raddb/modules/acct_unique
including configuration file /usr/local/freeradius/etc/raddb/modules/mschap
including configuration file /usr/local/freeradius/etc/raddb/modules/passwd
including configuration file /usr/local/freeradius/etc/raddb/modules/ntlm_auth
including configuration file /usr/local/freeradius/etc/raddb/modules/perl
including configuration file /usr/local/freeradius/etc/raddb/modules/rediswho
including configuration file /usr/local/freeradius/etc/raddb/modules/files
including configuration file /usr/local/freeradius/etc/raddb/modules/chap
including configuration file /usr/local/freeradius/etc/raddb/modules/attr_rewrite
including configuration file /usr/local/freeradius/etc/raddb/modules/otp
including configuration file /usr/local/freeradius/etc/raddb/modules/etc_group
including configuration file /usr/local/freeradius/etc/raddb/modules/sradutmp
including configuration file /usr/local/freeradius/etc/raddb/modules/exec
including configuration file /usr/local/freeradius/etc/raddb/policy.conf
including configuration file /usr/local/freeradius/etc/raddb/sites-enabled/abills_default
main {
        user = "freerad"
        group = "freerad"
        allow_core_dumps = no
}
including dictionary file /usr/local/freeradius/etc/raddb/dictionary
main {
        name = "radiusd"
        prefix = "/usr/local/freeradius"
        localstatedir = "/var"
        sbindir = "/usr/local/freeradius/sbin"
        logdir = "/var/log"
        run_dir = "/var/run/radiusd"
        libdir = "/usr/local/lib/freeradius-2.1.6"
        radacctdir = "/var/log/radacct"
        hostname_lookups = no
        max_request_time = 30
        cleanup_delay = 5
        max_requests = 80960
        pidfile = "/var/run/radiusd/radiusd.pid"
        checkrad = "/usr/local/freeradius/sbin/checkrad"
        debug_level = 0
        proxy_requests = no
 log {
        stripped_names = no
        auth = no
        auth_badpass = no
        auth_goodpass = no
 }
 security {
        max_attributes = 200
        reject_delay = 1
        status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
radiusd: #### Loading Clients ####
 client 127.0.0.1 {
        require_message_authenticator = no
        secret = "radsecret"
        shortname = "shorrname"
 }
radiusd: #### Instantiating modules ####
 instantiate {
 Module: Linked to module rlm_exec
 Module: Instantiating module "exec" from file /usr/local/freeradius/etc/raddb/modules/exec
  exec {
        wait = no
        input_pairs = "request"
        shell_escape = yes
  }
 Module: Linked to module rlm_expiration
 Module: Instantiating module "expiration" from file /usr/local/freeradius/etc/raddb/modules/expiration
  expiration {
        reply-message = "Password Has Expired  "
  }
 Module: Linked to module rlm_logintime
 Module: Instantiating module "logintime" from file /usr/local/freeradius/etc/raddb/modules/logintime
  logintime {
        reply-message = "You are calling outside your allowed timespan  "
        minimum-timeout = 60
  }
 }
radiusd: #### Loading Virtual Servers ####
server { # from file /usr/local/freeradius/etc/raddb/radiusd.conf
 modules {
 Module: Checking authenticate {...} for more modules to load
 Module: Linked to module rlm_pap
 Module: Instantiating module "pap" from file /usr/local/freeradius/etc/raddb/modules/pap
  pap {
        encryption_scheme = "auto"
        auto_header = no
  }
 Module: Linked to module rlm_mschap
 Module: Instantiating module "mschap" from file /usr/local/freeradius/etc/raddb/modules/mschap
  mschap {
        use_mppe = yes
        require_encryption = no
        require_strong = no
        with_ntdomain_hack = no
        allow_retry = yes
  }
 Module: Linked to module rlm_perl
 Module: Instantiating module "perl" from file /usr/local/freeradius/etc/raddb/modules/perl
  perl {
        module = "/usr/abills/libexec/rlm_perl.pl"
        func_authorize = "authorize"
        func_authenticate = "authenticate"
        func_accounting = "accounting"
        func_preacct = "preacct"
        func_checksimul = "checksimul"
        func_detach = "detach"
        func_xlat = "xlat"
        func_pre_proxy = "pre_proxy"
        func_post_proxy = "post_proxy"
        func_post_auth = "post_auth"
        func_recv_coa = "recv_coa"
        func_send_coa = "send_coa"
  }
 Module: Checking authorize {...} for more modules to load
 Module: Linked to module rlm_preprocess
 Module: Instantiating module "preprocess" from file /usr/local/freeradius/etc/raddb/modules/preprocess
  preprocess {
        huntgroups = "/usr/local/freeradius/etc/raddb/huntgroups"
        hints = "/usr/local/freeradius/etc/raddb/hints"
        with_ascend_hack = no
        ascend_channels_per_line = 23
        with_ntdomain_hack = no
        with_specialix_jetstream_hack = no
        with_cisco_vsa_hack = no
        with_alvarion_vsa_hack = no
  }
 Module: Linked to module rlm_files
 Module: Instantiating module "files" from file /usr/local/freeradius/etc/raddb/modules/files
  files {
        usersfile = "/usr/local/freeradius/etc/raddb/users"
        acctusersfile = "/usr/local/freeradius/etc/raddb/acct_users"
        preproxy_usersfile = "/usr/local/freeradius/etc/raddb/preproxy_users"
        compat = "no"
  }
 Module: Checking preacct {...} for more modules to load
 Module: Checking accounting {...} for more modules to load
 Module: Checking post-auth {...} for more modules to load
 } # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
        type = "auth"
        ipaddr = *
        port = 0
}
listen {
        type = "acct"
        ipaddr = *
        port = 0
}
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Ready to process requests.

Код: Выделить всё

#!/bin/sh -e
iptables -P INPUT ACCEPT
iptables -P OUTPUT ACCEPT
iptables -P FORWARD ACCEPT

iptables -F
iptables -F -t nat
iptables -F -t mangle
iptables -X
iptables -X -t nat
iptables -X -t mangle

iptables -A INPUT -i lo -j ACCEPT
iptables -A OUTPUT -o lo -j ACCEPT

iptables -A INPUT -p TCP  --dport 22 -j ACCEPT

iptables -A INPUT -p UDP -s 0/0 --sport 53 -j ACCEPT
iptables -A INPUT -p UDP -s 0/0  --dport 53 -j ACCEPT

iptables -A INPUT -p ALL -m state --state ESTABLISHED,RELATED -j ACCEPT

iptables -A FORWARD -i ppp+ -o eth1 -j ACCEPT

#Открываем Фовардинг
echo "1" > /proc/sys/net/ipv4/ip_forward

exit 0

Код: Выделить всё

# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:11:d8:13:ff:e7
          inet addr:192.168.1.101  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::211:d8ff:fe13:ffe7/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:8711 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4383 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:930704 (930.7 KB)  TX bytes:1181882 (1.1 MB)
          Interrupt:19 Base address:0xdead

lo        Link encap:Локальная петля (Loopback)
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:207 errors:0 dropped:0 overruns:0 frame:0
          TX packets:207 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:28920 (28.9 KB)  TX bytes:28920 (28.9 KB)

Код: Выделить всё

# netstat -anp | grep 1812
udp        0      0 0.0.0.0:1812            0.0.0.0:*                           29590/radiusd 
# netstat -anp | grep 1813
udp        0      0 0.0.0.0:1813            0.0.0.0:*                           29590/radiusd 

Код: Выделить всё

# ps xa |grep radiusd
 3483 pts/4    S+     0:00 grep radiusd
29590 ?        Ssl    0:00 /usr/sbin/radiusd

Код: Выделить всё

2012-03-28 06:38:16	LOG_INFO	AUTH	test	GT: 0.02196	NAS Server
2012-03-28 05:56:40	LOG_WARNING	ACCT	-	Not specified NAS server	UNKNOWN

Код: Выделить всё

#Freeradius version 2.1.12
prefix = /usr/local/freeradius
exec_prefix = ${prefix}
sysconfdir = ${prefix}/etc
localstatedir = ${prefix}/var
sbindir = ${exec_prefix}/sbin
logdir = ${localstatedir}/log/radius
raddbdir = ${sysconfdir}/raddb
radacctdir = ${logdir}/radacct

#
#  name of the running server.  See also the "-n" command-line option.
name = radiusd

#  Location of config and logfiles.
confdir = ${raddbdir}
run_dir = ${localstatedir}/run/${name}

# Should likely be ${localstatedir}/lib/radiusd
db_dir = ${raddbdir}
libdir = ${exec_prefix}/lib
pidfile = ${run_dir}/${name}.pid

Код: Выделить всё

including dictionary file /usr/local/freeradius/etc/raddb/dictionary
main {
	name = "radiusd"
	prefix = "/usr/local/freeradius"
	localstatedir = "/usr/local/freeradius/var"
	sbindir = "/usr/local/freeradius/sbin"
	logdir = "/usr/local/freeradius/var/log/radius"
	run_dir = "/usr/local/freeradius/var/run/radiusd"
	libdir = "/usr/local/freeradius/lib"
	radacctdir = "/usr/local/freeradius/var/log/radius/radacct"

	pidfile = "/usr/local/freeradius/var/run/radiusd/radiusd.pid"
	checkrad = "/usr/local/freeradius/sbin/checkrad"

Код: Выделить всё

#!/bin/sh
# Start/stop the FreeRADIUS daemon.

### BEGIN INIT INFO
# Provides:          freeradius
# Required-Start:    $remote_fs $network $syslog
# Should-Start:      $time mysql slapd postgresql samba krb5-kdc
# Required-Stop:     $remote_fs $syslog
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: FreeRADIUS Daemon 
# Description:       Extensible, configurable radius daemon
### END INIT INFO

set -e

. /lib/lsb/init-functions

PROG="radiusd"
PROGRAM="/usr/sbin/radiusd"
PIDFILE="/usr/local/freeradius/var/run/radiusd/radiusd.pid"
DESCR="FreeRADIUS daemon"

if [ -r /etc/default/$PROG ]; then
  . /etc/default/$PROG
fi

test -f $PROGRAM || exit 0

# /var/run may be a tmpfs
if [ ! -d /usr/local/freeradius/var/run/freeradius ]; then
  mkdir -p /usr/local/freeradius/var/run/
  chown freerad:freerad /usr/local/freeradius/var/run/radiusd
fi

export PATH="${PATH:+$PATH:}/usr/sbin:/sbin"

ret=0

case "$1" in
        start)
                log_daemon_msg "Starting $DESCR" "$PROG"
                start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $PROGRAM -- $FREERADIUS_OPTIONS || ret=$?
                log_end_msg $ret
                exit $ret
                ;;
        stop)
                log_daemon_msg "Stopping $DESCR" "$PROG"
                if [ -f "$PIDFILE" ] ; then
                  start-stop-daemon --stop --retry=TERM/30/KILL/5 --quiet --pidfile $PIDFILE || ret=$?
                else
                  log_action_cont_msg "$PIDFILE not found"
                  ret=0
                fi
                log_end_msg $ret
                ;;
        restart)
                $0 stop
                $0 start
                ;;
        reload|force-reload)
                log_daemon_msg "Reloading $DESCR" "$PROG"
                if [ -f "$PIDFILE" ] ; then
                  start-stop-daemon --stop --signal HUP --quiet --pidfile $PIDFILE || ret=$?
                else
                  log_action_cont_msg "$PIDFILE not found"
                  ret=0
                fi
                log_end_msg $ret
                ;;
        *)
                echo "Usage: $0 start|stop|restart|force-reload|reload"
                exit 1
                ;;
esac

exit 0