Идём дальше
Ready to process requests.
rad_recv: Access-Request packet from host 127.0.0.1:63128, id=211, length=146
NAS-Identifier = ""
NAS-Port = 1
NAS-Port-Type = Virtual
Service-Type = Framed-User
Framed-Protocol = PPP
Calling-Station-Id = "10.1.1.238"
User-Name = "test"
MS-CHAP-Challenge = 0xbb1e689d209cd97b4b3418ecbda33974
MS-CHAP2-Response = 0x01005fd20fc017df9b62df176c03d7dbacc7000000000000000084d839e4ef4f09d56e4c48a1708ef0223e3e4fb8f009160c
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
Exec-Program output: User-Password == "password"
Exec-Program-Wait: value-pairs: User-Password == "password"
Exec-Program: returned: 0
modcall[authorize]: module "pre_auth" returns ok for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
modcall[authorize]: module "chap" returns noop for request 0
rlm_mschap: Found MS-CHAP attributes. Setting 'Auth-Type = mschap'
modcall[authorize]: module "mschap" returns ok for request 0
rlm_realm: No '@' in User-Name = "test", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 0
users: Matched entry DEFAULT at line 217
modcall[authorize]: module "files" returns ok for request 0
rlm_pap: Found existing Auth-Type, not changing it.
modcall[authorize]: module "pap" returns noop for request 0
modcall: leaving group authorize (returns ok) for request 0
rad_check_password: Found Auth-Type MS-CHAP
auth: type "MS-CHAP"
Processing the authenticate section of radiusd.conf
modcall: entering group MS-CHAP for request 0
rlm_mschap: Told to do MS-CHAPv2 for test with NT-Password
rlm_mschap: adding MS-CHAPv2 MPPE keys
modcall[authenticate]: module "mschap" returns ok for request 0
modcall: leaving group MS-CHAP (returns ok) for request 0
Exec-Program output: Session-Timeout = 978893, MS-MPPE-Encryption-Types = 0x00000006, Framed-IP-Address = 10.80.5.10, Framed-IP-Netmask = 255.255.255.255, MS-CHAP2-SUCCESS = 0x01533d39433244463430444236303236423134423833344535304233333235443241313933303233433336, MS-MPPE-Encryption-Policy = 0x00000001, mpd-limit = "in#1=all 64000 4000 pass,out#1=all 64000 4000 pass",
Exec-Program-Wait: value-pairs: Session-Timeout = 978893, MS-MPPE-Encryption-Types = 0x00000006, Framed-IP-Address = 10.80.5.10, Framed-IP-Netmask = 255.255.255.255, MS-CHAP2-SUCCESS = 0x01533d39433244463430444236303236423134423833344535304233333235443241313933303233433336, MS-MPPE-Encryption-Policy = 0x00000001, mpd-limit = "in#1=all 64000 4000 pass,out#1=all 64000 4000 pass",
Exec-Program: returned: 0
Sending Access-Accept of id 211 to 127.0.0.1 port 63128
MS-CHAP2-Success = 0x01533d39433244463430444236303236423134423833344535304233333235443241313933303233433336
MS-MPPE-Recv-Key = 0xbf60c2a0e2438fa03629dafa79e8adbc
MS-MPPE-Send-Key = 0x40473431194aaf2219dc1ba0ceb3a5f7
MS-MPPE-Encryption-Policy = 0x00000001
MS-MPPE-Encryption-Types = 0x00000006
Session-Timeout = 978893
Framed-IP-Address = 10.80.5.10
Framed-IP-Netmask = 255.255.255.255
mpd-limit = "in#1=all 64000 4000 pass,out#1=all 64000 4000 pass"
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Accounting-Request packet from host 127.0.0.1:63098, id=255, length=120
NAS-Identifier = ""
NAS-Port = 1
NAS-Port-Type = Virtual
Service-Type = Framed-User
Framed-Protocol = PPP
Calling-Station-Id = "10.1.1.238"
Acct-Status-Type = Start
Framed-IP-Address = 10.80.5.10
Framed-IP-Netmask = 255.255.255.255
User-Name = "test"
Acct-Session-Id = "7110707-L-1"
Acct-Multi-Session-Id = "7110707-B-1"
Acct-Link-Count = 1
Acct-Authentic = RADIUS
Processing the preacct section of radiusd.conf
modcall: entering group preacct for request 1
modcall[preacct]: module "preprocess" returns noop for request 1
rlm_acct_unique: Hashing 'NAS-Port = 1,Client-IP-Address = 127.0.0.1,NAS-IP-Address = 127.0.0.1,Acct-Session-Id = "7110707-L-1",User-Name = "test"'
rlm_acct_unique: Acct-Unique-Session-ID = "94c81d6cb83b625f".
modcall[preacct]: module "acct_unique" returns ok for request 1
rlm_realm: No '@' in User-Name = "test", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[preacct]: module "suffix" returns noop for request 1
acct_users: Matched entry DEFAULT at line 17
modcall[preacct]: module "files" returns ok for request 1
modcall: leaving group preacct (returns ok) for request 1
Processing the accounting section of radiusd.conf
modcall: entering group accounting for request 1
radius_xlat: '/var/log/radacct/127.0.0.1/detail-20081119'
rlm_detail: /var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /var/log/radacct/127.0.0.1/detail-20081119
modcall[accounting]: module "detail" returns ok for request 1
modcall[accounting]: module "unix" returns ok for request 1
radius_xlat: '/var/log/radutmp'
radius_xlat: 'test'
modcall[accounting]: module "radutmp" returns ok for request 1
modcall: leaving group accounting (returns ok) for request 1
Sending Accounting-Response of id 255 to 127.0.0.1 port 63098
Finished request 1
Going to the next request
Cleaning up request 1 ID 255 with timestamp 49243933
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 211 with timestamp 49243933
Nothing to do. Sleeping until we see a request.