mpd5 - шейпинг

sr_ · Сообщение **sr_** » Вт июл 01, 2008 9:44 am

стоит mpd5.1 abills 0.37b freeradius
хочется чтобы трафик шейпилася через ng_car, но...

вот такие строчки передаю в web интерфейсе абилз

Код: Выделить всё

mpd-limit+="in#1=all 64000 4000 pass",mpd-limit+="out#1=all 64000 4000 pass"

вот что передает на мпд радиус

Код: Выделить всё

rad_recv: Access-Accept packet from host 192.168.244.219:1812, id=76, length=84
        Session-Timeout = 2632974
        mpd-limit = "in#1=all 64000 4000 pass,out#1=all 64000 4000 pass"

а скорость не шейпится

кто что может посоветовать ?

Dmitiry_Silverston · Ср ноя 12, 2008 3:30 pm

Такая же самая ситуация. Но видел в одном из примеров такую рекомендацию:

К сожалению, по непонятным причинам, ABillS "из коробки" неправильно обрабатывает оператор "+=" в тарифных планах. Чтобы исправить сие досадное недоразумение найдите в Auth.pm следующие строки:

$RAD_PAIRS->{"$left"} =~ s/\"//g;

$RAD_PAIRS->{"$left"}="\"". $RAD_PAIRS->{"$left"} .",$right\"";

}

else {

$RAD_PAIRS->{"$left"}="\"$right\"";

}

и замените на следующие:

$RAD_PAIRS->{"$left"} =~ s/\"//g;

push( @ {$RAD_PAIRS->{"$left"} }, $right );

}

else {

$RAD_PAIRS->{"$left"}= [ $right ];

}

После этого ABillS будет корректно передавать аттрибуты в формате "+="

Лично у меня после такой манипуляции RADIUS выдал вообще только это:

# radtest test test 127.0.0.1:1812 0 radsecret 0 127.0.0.1
Sending Access-Request of id 68 to 127.0.0.1 port 1812
User-Name = "test"
User-Password = "test"
NAS-IP-Address = 127.0.0.1
NAS-Port = 0
Framed-Protocol = PPP
rad_recv: Access-Accept packet from host 127.0.0.1:1812, id=68, length=20
И пользователю перестал присваиватся адрес сервером:
Проверка имени и пароля, затем регистрация компьютера в сети и... Ошибка 738.

boroda · Чт ноя 13, 2008 5:13 am

Dmitiry_Silverston писал(а):К сожалению, по непонятным причинам, ABillS "из коробки" неправильно обрабатывает оператор "+=" в тарифных планах.

В текущей ревизии данный баг исправлен. Поэтому применение данного патча приводит к ошибке. Обновитесь...

Dmitiry_Silverston · Вт ноя 18, 2008 7:54 am

Обновился до версии 0,40. Вроде всё прикрутил. Проблема с нарезкой скорости осталась.
Вобщем если в тарифном плане не указывать парамеры радиуса, то юзер коннектится нормально, скорость максимальная.

Если указываю:
mpd-limit+=out#1=all shape 64000 pass,mpd-limit+=in#1=all shape 64000 pass
тогда юзер авторизируется, но инета как такового нету, пинга с миром тоже нуль. Ни в каких логах ничего не намекается на какие либо огрехи.
Сталкивался ли кто с такой проблемкой?

Вт ноя 18, 2008 4:12 pm

radiusd -x

Dmitiry_Silverston · Ср ноя 19, 2008 8:06 am

# radiusd -X
Starting - reading configuration files ...
reread_config: reading radiusd.conf
Config: including file: /usr/local/etc/raddb/proxy.conf
Config: including file: /usr/local/etc/raddb/clients.conf
Config: including file: /usr/local/etc/raddb/snmp.conf
Config: including file: /usr/local/etc/raddb/eap.conf
Config: including file: /usr/local/etc/raddb/sql.conf
main: prefix = "/usr/local"
main: localstatedir = "/var"
main: logdir = "/var/log"
main: libdir = "/usr/local/lib"
main: radacctdir = "/var/log/radacct"
main: hostname_lookups = no
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 1812
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_file = "/var/log/radius.log"
main: log_auth = no
main: log_auth_badpass = no
main: log_auth_goodpass = no
main: pidfile = "/var/run/radiusd/radiusd.pid"
main: bind_address = 127.0.0.1 IP address [127.0.0.1]
main: user = "(null)"
main: group = "(null)"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/usr/local/sbin/checkrad"
main: proxy_requests = yes
proxy: retry_delay = 5
proxy: retry_count = 3
proxy: synchronous = no
proxy: default_fallback = yes
proxy: dead_time = 120
proxy: post_proxy_authorize = no
proxy: wake_all_if_all_dead = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files: reading dictionary
read_config_files: reading naslist
Using deprecated naslist file. Support for this will go away soon.
read_config_files: reading clients
read_config_files: reading realms
There appears to be another RADIUS server running on the authentication port 1812
#

ran · Сообщение **ran** » Ср ноя 19, 2008 9:07 am

There appears to be another RADIUS server running on the authentication port 1812

ну и нафига ты второй сервер запустил?

нада тот прибить и запустить новый... и потом видимо интересны его матюги в момент подключения усера а не рассказы о себе в момент запуска...

Dmitiry_Silverston · Ср ноя 19, 2008 10:30 am

Убил. Запускаю снова:
# radiusd -X
Starting - reading configuration files ...
reread_config: reading radiusd.conf
Config: including file: /usr/local/etc/raddb/proxy.conf
Config: including file: /usr/local/etc/raddb/clients.conf
Config: including file: /usr/local/etc/raddb/snmp.conf
Config: including file: /usr/local/etc/raddb/eap.conf
Config: including file: /usr/local/etc/raddb/sql.conf
main: prefix = "/usr/local"
main: localstatedir = "/var"
main: logdir = "/var/log"
main: libdir = "/usr/local/lib"
main: radacctdir = "/var/log/radacct"
main: hostname_lookups = no
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 1812
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_file = "/var/log/radius.log"
main: log_auth = no
main: log_auth_badpass = no
main: log_auth_goodpass = no
main: pidfile = "/var/run/radiusd/radiusd.pid"
main: bind_address = 127.0.0.1 IP address [127.0.0.1]
main: user = "(null)"
main: group = "(null)"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/usr/local/sbin/checkrad"
main: proxy_requests = yes
proxy: retry_delay = 5
proxy: retry_count = 3
proxy: synchronous = no
proxy: default_fallback = yes
proxy: dead_time = 120
proxy: post_proxy_authorize = no
proxy: wake_all_if_all_dead = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files: reading dictionary
read_config_files: reading naslist
Using deprecated naslist file. Support for this will go away soon.
read_config_files: reading clients
read_config_files: reading realms
radiusd: entering modules setup
Module: Library search path is /usr/local/lib
Module: Loaded exec
exec: wait = yes
exec: program = "(null)"
exec: input_pairs = "request"
exec: output_pairs = "(null)"
exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
pap: encryption_scheme = "crypt"
pap: auto_header = yes
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
mschap: use_mppe = yes
mschap: require_encryption = no
mschap: require_strong = no
mschap: with_ntdomain_hack = no
mschap: passwd = "(null)"
mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded System
unix: cache = no
unix: passwd = "(null)"
unix: shadow = "(null)"
unix: group = "(null)"
unix: radwtmp = "/var/log/radwtmp"
unix: usegroup = no
unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
eap: default_eap_type = "md5"
eap: timer_expire = 60
eap: ignore_unknown_eap_types = no
eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
gtc: challenge = "Password: "
gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
exec: wait = yes
exec: program = "/usr/abills/libexec/rauth.pl pre_auth"
exec: input_pairs = "request"
exec: output_pairs = "config"
exec: packet_type = "(null)"
Module: Instantiated exec (pre_auth)
Module: Loaded preprocess
preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups"
preprocess: hints = "/usr/local/etc/raddb/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
preprocess: with_alvarion_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
realm: format = "suffix"
realm: delimiter = "@"
realm: ignore_default = no
realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded files
files: usersfile = "/usr/local/etc/raddb/users"
files: acctusersfile = "/usr/local/etc/raddb/acct_users"
files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
files: compat = "no"
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded detail
detail: detailfile = "/var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d"
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
radutmp: filename = "/var/log/radutmp"
radutmp: username = "%{User-Name}"
radutmp: case_sensitive = yes
radutmp: check_with_nas = yes
radutmp: perm = 384
radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
exec: wait = yes
exec: program = "/usr/abills/libexec/rauth.pl post_auth"
exec: input_pairs = "request"
exec: output_pairs = "config"
exec: packet_type = "(null)"
Module: Instantiated exec (post_auth)
Listening on authentication 127.0.0.1:1812
Listening on accounting 127.0.0.1:1813
Ready to process requests.

ran · Сообщение **ran** » Ср ноя 19, 2008 10:38 am

и где здесь хоть 1 подключение?

Dmitiry_Silverston · Ср ноя 19, 2008 1:04 pm

Идём дальше

Ready to process requests.
rad_recv: Access-Request packet from host 127.0.0.1:63128, id=211, length=146
NAS-Identifier = ""
NAS-Port = 1
NAS-Port-Type = Virtual
Service-Type = Framed-User
Framed-Protocol = PPP
Calling-Station-Id = "10.1.1.238"
User-Name = "test"
MS-CHAP-Challenge = 0xbb1e689d209cd97b4b3418ecbda33974
MS-CHAP2-Response = 0x01005fd20fc017df9b62df176c03d7dbacc7000000000000000084d839e4ef4f09d56e4c48a1708ef0223e3e4fb8f009160c
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
Exec-Program output: User-Password == "password"
Exec-Program-Wait: value-pairs: User-Password == "password"
Exec-Program: returned: 0
modcall[authorize]: module "pre_auth" returns ok for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
modcall[authorize]: module "chap" returns noop for request 0
rlm_mschap: Found MS-CHAP attributes. Setting 'Auth-Type = mschap'
modcall[authorize]: module "mschap" returns ok for request 0
rlm_realm: No '@' in User-Name = "test", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 0
users: Matched entry DEFAULT at line 217
modcall[authorize]: module "files" returns ok for request 0
rlm_pap: Found existing Auth-Type, not changing it.
modcall[authorize]: module "pap" returns noop for request 0
modcall: leaving group authorize (returns ok) for request 0
rad_check_password: Found Auth-Type MS-CHAP
auth: type "MS-CHAP"
Processing the authenticate section of radiusd.conf
modcall: entering group MS-CHAP for request 0
rlm_mschap: Told to do MS-CHAPv2 for test with NT-Password
rlm_mschap: adding MS-CHAPv2 MPPE keys
modcall[authenticate]: module "mschap" returns ok for request 0
modcall: leaving group MS-CHAP (returns ok) for request 0
Exec-Program output: Session-Timeout = 978893, MS-MPPE-Encryption-Types = 0x00000006, Framed-IP-Address = 10.80.5.10, Framed-IP-Netmask = 255.255.255.255, MS-CHAP2-SUCCESS = 0x01533d39433244463430444236303236423134423833344535304233333235443241313933303233433336, MS-MPPE-Encryption-Policy = 0x00000001, mpd-limit = "in#1=all 64000 4000 pass,out#1=all 64000 4000 pass",
Exec-Program-Wait: value-pairs: Session-Timeout = 978893, MS-MPPE-Encryption-Types = 0x00000006, Framed-IP-Address = 10.80.5.10, Framed-IP-Netmask = 255.255.255.255, MS-CHAP2-SUCCESS = 0x01533d39433244463430444236303236423134423833344535304233333235443241313933303233433336, MS-MPPE-Encryption-Policy = 0x00000001, mpd-limit = "in#1=all 64000 4000 pass,out#1=all 64000 4000 pass",
Exec-Program: returned: 0
Sending Access-Accept of id 211 to 127.0.0.1 port 63128
MS-CHAP2-Success = 0x01533d39433244463430444236303236423134423833344535304233333235443241313933303233433336
MS-MPPE-Recv-Key = 0xbf60c2a0e2438fa03629dafa79e8adbc
MS-MPPE-Send-Key = 0x40473431194aaf2219dc1ba0ceb3a5f7
MS-MPPE-Encryption-Policy = 0x00000001
MS-MPPE-Encryption-Types = 0x00000006
Session-Timeout = 978893
Framed-IP-Address = 10.80.5.10
Framed-IP-Netmask = 255.255.255.255
mpd-limit = "in#1=all 64000 4000 pass,out#1=all 64000 4000 pass"
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Accounting-Request packet from host 127.0.0.1:63098, id=255, length=120
NAS-Identifier = ""
NAS-Port = 1
NAS-Port-Type = Virtual
Service-Type = Framed-User
Framed-Protocol = PPP
Calling-Station-Id = "10.1.1.238"
Acct-Status-Type = Start
Framed-IP-Address = 10.80.5.10
Framed-IP-Netmask = 255.255.255.255
User-Name = "test"
Acct-Session-Id = "7110707-L-1"
Acct-Multi-Session-Id = "7110707-B-1"
Acct-Link-Count = 1
Acct-Authentic = RADIUS
Processing the preacct section of radiusd.conf
modcall: entering group preacct for request 1
modcall[preacct]: module "preprocess" returns noop for request 1
rlm_acct_unique: Hashing 'NAS-Port = 1,Client-IP-Address = 127.0.0.1,NAS-IP-Address = 127.0.0.1,Acct-Session-Id = "7110707-L-1",User-Name = "test"'
rlm_acct_unique: Acct-Unique-Session-ID = "94c81d6cb83b625f".
modcall[preacct]: module "acct_unique" returns ok for request 1
rlm_realm: No '@' in User-Name = "test", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[preacct]: module "suffix" returns noop for request 1
acct_users: Matched entry DEFAULT at line 17
modcall[preacct]: module "files" returns ok for request 1
modcall: leaving group preacct (returns ok) for request 1
Processing the accounting section of radiusd.conf
modcall: entering group accounting for request 1
radius_xlat: '/var/log/radacct/127.0.0.1/detail-20081119'
rlm_detail: /var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /var/log/radacct/127.0.0.1/detail-20081119
modcall[accounting]: module "detail" returns ok for request 1
modcall[accounting]: module "unix" returns ok for request 1
radius_xlat: '/var/log/radutmp'
radius_xlat: 'test'
modcall[accounting]: module "radutmp" returns ok for request 1
modcall: leaving group accounting (returns ok) for request 1
Sending Accounting-Response of id 255 to 127.0.0.1 port 63098
Finished request 1
Going to the next request
Cleaning up request 1 ID 255 with timestamp 49243933
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 211 with timestamp 49243933
Nothing to do. Sleeping until we see a request.

ran · Сообщение **ran** » Ср ноя 19, 2008 1:50 pm

уже лучше

ток я линухоид и мне все эти ваши мпд-лимит до петельки

пусь знающие товарисчи бздуны глянут

Dmitiry_Silverston · Ср ноя 19, 2008 2:22 pm

Кто знает, поделитесь мыслями. А то пайпы как-то нестабильно работают...

andrei · Ср ноя 19, 2008 4:44 pm

В тарифном плане в "RADIUS Parameters" вставить

mpd-limit+="out#1=all shape 64000 pass", mpd-limit+="in#1=all shape 64000 pass"

Не забываем ставить пробел после запятой.

Dmitiry_Silverston · Чт ноя 20, 2008 8:29 am

Спасибо. Граматику учту!
Теперь всё работает, скорость режется в каждом тарифном плане своя

правильно выглядит так:

# radtest test password 127.0.0.1:1812 0 radsecret 0 127.0.0.1
Sending Access-Request of id 144 to 127.0.0.1 port 1812
User-Name = "test"
User-Password = "password"
NAS-IP-Address = 127.0.0.1
NAS-Port = 0
Framed-Protocol = PPP
rad_recv: Access-Accept packet from host 127.0.0.1:1812, id=144, length=107
Session-Timeout = 903647
mpd-limit = "in#1=all shape 256000 pass"
Framed-IP-Address = 10.80.5.10
Framed-IP-Netmask = 255.255.255.255
mpd-limit = "out#1=all shape 256000 pass"

ran · Сообщение **ran** » Чт ноя 20, 2008 10:01 am

Теперь всё работает, скорость режется в каждом тарифном плане своя

а как быть с шейпингом в зависимости от класса трафика? а в зависимости от временнОго интервала?