abills.net.ua

[client]
#password = your_password
port = 3306
socket = /tmp/mysql.sock
character-sets-dir=/usr/local/share/mysql/charsets
default-character-set=utf8

# Here follows entries for some specific programs

# The MySQL server
[mysqld]
port = 3306
socket = /tmp/mysql.sock
skip-locking
key_buffer = 256M
max_allowed_packet = 1M
table_cache = 256
sort_buffer_size = 1M
read_buffer_size = 1M
read_rnd_buffer_size = 4M
myisam_sort_buffer_size = 64M
thread_cache_size = 8
query_cache_size= 16M
# Try number of CPU's*2 for thread_concurrency
thread_concurrency = 8
character-sets-dir=/usr/local/share/mysql/charsets
default-character-set=utf8
default-collation=utf8_general_ci
init-connect=SET NAMES utf8

# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
#
#skip-networking

# Replication Master Server (default)
# binary logging is required for replication
log-bin=mysql-bin

# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id = 1

# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
# the syntax is:
#
# CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
# MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
# where you replace <host>, <user>, <password> by quoted strings and
# <port> by the master's port number (3306 by default).
#
# Example:
#
# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
# MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
# start replication for the first time (even unsuccessfully, for example
# if you mistyped the password in master-password and the slave fails to
# connect), the slave will create a master.info file, and any later
# change in this file to the variables' values below will be ignored and
# overridden by the content of the master.info file, unless you shutdown
# the slave server, delete master.info and restart the slaver server.
# For that reason, you may want to leave the lines below untouched
# (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id = 2
#
# The replication master for this slave - required
#master-host = <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user = <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password = <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port = <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin

# Point the following paths to different dedicated disks
#tmpdir = /tmp/
#log-update = /path-to-dedicated-directory/hostname

# Uncomment the following if you are using InnoDB tables
#innodb_data_home_dir = /var/db/mysql/
#innodb_data_file_path = ibdata1:10M:autoextend
#innodb_log_group_home_dir = /var/db/mysql/
#innodb_log_arch_dir = /var/db/mysql/
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
#innodb_buffer_pool_size = 256M
#innodb_additional_mem_pool_size = 20M
# Set .._log_file_size to 25 % of buffer pool size
#innodb_log_file_size = 64M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit = 1
#innodb_lock_wait_timeout = 50

# Uncomment the following if you are using InnoDB tables
innodb_data_home_dir = /var/db/mysql/innodb
#innodb_data_file_path = ibdata1:10M:autoextend
#innodb_data_file_path = ibdata1:10M:autoextend

# Ниже задаётся сколько файлов срзу отвести под БД и какого размера
innodb_data_file_path = ibdata1:2000M;ibdata2:2000M:autoextend

innodb_log_group_home_dir = /var/db/mysql/innodb
#innodb_log_arch_dir = /var/db/mysql/innodb
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high

# Цифра ниже зависит от размера ОЗУ на машине. Рекомендуем указывать 50% от доступного ОЗУ
set-variable = innodb_buffer_pool_size=200M
set-variable = innodb_additional_mem_pool_size=15M
# Set .._log_file_size to 25 % of buffer pool size

# Цифра ниже - 25%-100% от цифры выше
set-variable = innodb_log_file_size=50M
set-variable = innodb_log_buffer_size=8M
innodb_flush_log_at_trx_commit=1
set-variable = innodb_lock_wait_timeout=50


# 1 - сброс лога на диск при каждом COMMIT (высокая надёжность)
# 0 - раз в сек (только при работе с UPS)
# 2 - при каждом COMMIT но не чаще раза в сек (только при работе с UPS)
innodb_flush_log_at_trx_commit=2

[mysqldump]
quick
max_allowed_packet = 16M

[mysql]
no-auto-rehash
character-sets-dir=/usr/local/share/mysql/charsets
default-character-set=utf8
# Remove the next comment character if you are not familiar with SQL
#safe-updates

[isamchk]
key_buffer = 128M
sort_buffer_size = 128M
read_buffer = 2M
write_buffer = 2M

[myisamchk]
key_buffer = 128M
sort_buffer_size = 128M
read_buffer = 2M
write_buffer = 2M

[mysqlhotcopy]
interactive-timeout

$conf{dbcharset}='utf8';
$conf{MAIL_CHARSET}='windows-1251';
$conf{default_charset}='windows-1251';