abills.net.ua

Добрый день, Собственно вопрос в следующем: как включить аунтификацию по ЧАП? Есил стоит МС-ЧАП2 то пользователь логинится.
Система: Суся 10 + пппое + радиус + абиллс.
пппое пропускает ЧАП, либо рубит радиус либо абиллс.... помогите разобраться

И все атки, как это победить???

Вот лог радиуса.

rad_recv: Access-Request packet from host 127.0.0.1:32809, id=111, length=72
Service-Type = Framed-User
Framed-Protocol = PPP
User-Name = "test"
CHAP-Password = 0xf45d4c3d24281f3cd2f04ea85f36dc5d49
NAS-IP-Address = 127.0.0.1
NAS-Port = 0
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 4
modcall[authorize]: module "preprocess" returns ok for request 4
radius_xlat: '/var/log/radius/radacct/127.0.0.1/auth-detail-20070927'
rlm_detail: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/127.0.0.1/auth-detail-20070927
modcall[authorize]: module "auth_log" returns ok for request 4
radius_xlat: '/usr/abills/libexec/rauth.pl pre_auth'
Exec-Program: /usr/abills/libexec/rauth.pl pre_auth
Exec-Program output: Auth-Type := Accept
Exec-Program-Wait: value-pairs: Auth-Type := Accept
Exec-Program: returned: 0
modcall[authorize]: module "pre_auth" returns ok for request 4
rlm_chap: WARNING: Auth-Type already set. Not setting to CHAP
modcall[authorize]: module "chap" returns noop for request 4
rlm_realm: No '@' in User-Name = "test", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 4
users: Matched entry DEFAULT at line 152
modcall[authorize]: module "files" returns ok for request 4
modcall: leaving group authorize (returns ok) for request 4
rad_check_password: Found Auth-Type Accept
rad_check_password: Auth-Type = Accept, accepting the user
radius_xlat: '/usr/abills/libexec/rauth.pl'
Exec-Program: /usr/abills/libexec/rauth.pl
Exec-Program output: Reply-Message = "Wrong CHAP password 'test'"
Exec-Program-Wait: value-pairs: Reply-Message = "Wrong CHAP password 'test'"
Exec-Program: returned: 1
Login incorrect (external check said so): [test/<CHAP-Password>] (from client localhost port 0)
Found Post-Auth-Type
Processing the post-auth section of radiusd.conf
modcall: entering group REJECT for request 4
radius_xlat: '/usr/abills/libexec/rauth.pl post_auth'
Exec-Program: /usr/abills/libexec/rauth.pl post_auth
Exec-Program output:
Exec-Program: returned: 0
modcall[post-auth]: module "post_auth" returns ok for request 4
modcall: leaving group REJECT (returns ok) for request 4
Delaying request 4 for 1 seconds
Finished request 4

внимательно прочитать документацию