Снова колбек

[slapik]

Добрый день!
Вроде все настроил как положено - нет колбека. сервер доступа 5350ХМ. 36-я версия abills. Freebsd6.0
есть такой тест с циски
test aaa group DIALUP 1111111:lena lena1975 new-code
Trying to authenticate with Servergroup DIALUP
User successfully authenticated
в это время при запущенном radiusd -xyz
rad_recv: Access-Request packet from host 10.0.200.5:21817, id=249, length=64
User-Password = "lena1975"
User-Name = "1111111:lena"
NAS-Port = 60000
NAS-IP-Address = 10.0.200.5
Exec-Program: /usr/abills/libexec/rauth.pl
Exec-Program-Wait: plaintext: 2007-07-24 15:50:30 LOG_DEBUG: AUTH [lena] Callback-Number = 1111111, Session-Timeout = 634170, Framed-IP-Address = 10.0.253.10, Framed-IP-Netmask = 255.255.255.255, Callback-Number = 1111111, Session-Timeout = 634170, Framed-IP-Address = 10.0.253.10, Framed-IP-Netmask = 255.255.255.255,
Exec-Program: returned: 0
Sending Access-Accept of id 249 to 10.0.200.5 port 21817

Tue Jul 24 15:38:11 2007
Acct-Session-Id = "00059254"
Cisco-AVPair = "caller-type-of-number=Unknown"
Framed-Protocol = PPP
User-Name = "xxxxxxx:lena"
Cisco-AVPair = "connect-progress=Call Up"
Acct-Authentic = RADIUS
Acct-Status-Type = Start
Calling-Station-Id = "805xxxxxxx"
Called-Station-Id = "xxxxxxx"
NAS-Port-Type = Async
Connect-Info = "44000/26400 V90/V42bis/LAPM"
NAS-Port = 259
NAS-Port-Id = "Async1/43"
Service-Type = 2
NAS-IP-Address = 10.0.200.5
Acct-Delay-Time = 0
Client-IP-Address = 10.0.200.5
Acct-Unique-Session-Id = "b3956ccaf0e4dc82"
Timestamp = 1185280691
Tue Jul 24 15:38:12 2007
Acct-Session-Id = "00059254"
Cisco-AVPair = "caller-type-of-number=Unknown"
Framed-Protocol = PPP
User-Name = "xxxxxxx:lena"
Acct-Authentic = RADIUS
Cisco-AVPair = "connect-progress=Call Up"
Cisco-AVPair = "nas-tx-speed=44000"
Cisco-AVPair = "nas-rx-speed=26400"
Acct-Session-Time = 1
Acct-Input-Octets = 20
Acct-Output-Octets = 8
Acct-Input-Packets = 1
Acct-Output-Packets = 1
Acct-Terminate-Cause = User-Request
Cisco-AVPair = "disc-cause-ext=PPP Receive Term"
Acct-Status-Type = Stop
Calling-Station-Id = "805xxxxxxx"
Called-Station-Id = "xxxxxxx"
NAS-Port-Type = Async
Connect-Info = "44000/26400 V90/V42bis/LAPM"
NAS-Port = 259
NAS-Port-Id = "Async1/43"
Service-Type = 2
NAS-IP-Address = 10.0.200.5
Acct-Delay-Time = 0
Client-IP-Address = 10.0.200.5
Acct-Unique-Session-Id = "b3956ccaf0e4dc82"
Timestamp = 1185280692

Спасибо!