Ошибка 778

[sstt]

Пытаюсь настроить abills
FreeBSD + mpd43
при попытке подключиться по vpn выдает ошибку 778 (Невозможно проверить идентичность сервера)

mpd:
process 31113 started, version 4.3 (xxx@xxx.ru 14:42 27-Sep-2007)
CONSOLE: listening on 127.0.0.1 5005
[pptp0] using interface ng0
PPTP: waiting for connection on 192.168.12.11
[pptp1] using interface ng1
PPTP: waiting for connection on 192.168.12.11
PPTP: Incoming control connection from 192.168.12.5 1164 to 192.168.12.11 1723
pptp0: attached to connection with 192.168.12.5 1164
[pptp0] Accepting PPTP connection
[pptp0] opening link "pptp0"...
[pptp0] link: OPEN event
[pptp0] LCP: Open event
[pptp0] LCP: state change Initial --> Starting
[pptp0] LCP: LayerStart
[pptp0] PPTP: attaching to peer's outgoing call
[pptp0] link: UP event
[pptp0] link: origination is remote
[pptp0] LCP: Up event
[pptp0] LCP: state change Starting --> Req-Sent
[pptp0] LCP: SendConfigReq #1
ACFCOMP
PROTOCOMP
MRU 1500
MAGICNUM 1ef0e9ae
AUTHPROTO CHAP MSOFTv2
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 04 76 e8 69 44
[pptp0] LCP: rec'd Configure Request #0 (Req-Sent)
MRU 1400
MAGICNUM 38471e55
PROTOCOMP
ACFCOMP
CALLBACK 6
[pptp0] LCP: SendConfigRej #0
CALLBACK 6
[pptp0] LCP: rec'd Configure Request #1 (Req-Sent)
MRU 1400
MAGICNUM 38471e55
PROTOCOMP
ACFCOMP
[pptp0] LCP: SendConfigAck #1
MRU 1400
MAGICNUM 38471e55
PROTOCOMP
ACFCOMP
[pptp0] LCP: state change Req-Sent --> Ack-Sent
[pptp0] LCP: SendConfigReq #2
ACFCOMP
PROTOCOMP
MRU 1500
MAGICNUM 1ef0e9ae
AUTHPROTO CHAP MSOFTv2
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 04 76 e8 69 44
[pptp0] LCP: rec'd Configure Reject #2 (Ack-Sent)
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 04 76 e8 69 44
[pptp0] LCP: SendConfigReq #3
ACFCOMP
PROTOCOMP
MRU 1500
MAGICNUM 1ef0e9ae
AUTHPROTO CHAP MSOFTv2
[pptp0] LCP: rec'd Configure Ack #3 (Ack-Sent)
ACFCOMP
PROTOCOMP
MRU 1500
MAGICNUM 1ef0e9ae
AUTHPROTO CHAP MSOFTv2
[pptp0] LCP: state change Ack-Sent --> Opened
[pptp0] LCP: auth: peer wants nothing, I want CHAP
[pptp0] CHAP: sending CHALLENGE len:17
[pptp0] LCP: LayerUp
[pptp0] LCP: rec'd Ident #2 (Opened)
[pptp0] LCP: rec'd Ident #3 (Opened)
[pptp0] CHAP: rec'd RESPONSE #1
Name: "www"
[pptp0] AUTH: Auth-Thread started
[pptp0] AUTH: Trying RADIUS
[pptp0] RADIUS: RadiusAuthenticate for: www
[pptp0] RADIUS: rec'd RAD_ACCESS_ACCEPT for user www
[pptp0] RADIUS: RadiusGetParams: PANIC no MS-CHAPv2 response received
[pptp0] AUTH: RADIUS returned authenticated
[pptp0] AUTH: Auth-Thread finished normally
[pptp0] CHAP: ChapInputFinish: status authenticated
Reply message: Welcome
[pptp0] CHAP: sending SUCCESS len:7
[pptp0] LCP: authorization successful
[pptp0] Bundle up: 1 link, total bandwidth 64000 bps
[pptp0] IPCP: Open event
[pptp0] IPCP: state change Initial --> Starting
[pptp0] IPCP: LayerStart
[pptp0] CCP: Open event
[pptp0] CCP: state change Initial --> Starting
[pptp0] CCP: LayerStart
[pptp0] IPCP: Up event
[pptp0] IPCP: state change Starting --> Req-Sent
[pptp0] IPCP: SendConfigReq #1
IPADDR 10.0.0.1
COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
[pptp0] CCP: Up event
[pptp0] CCP: state change Starting --> Req-Sent
[pptp0] CCP: SendConfigReq #1
MPPC
0x01000060:MPPE(40, 128 bits), stateless
[pptp0] AUTH: Accounting-Thread started
[pptp0] RADIUS: RadiusAccount for: www (Type: 1)
[pptp0] LCP: rec'd Terminate Request #4 (Opened)
[pptp0] LCP: state change Opened --> Stopping
[pptp0] AUTH: Accounting data for user www: 3 seconds, 218 octets in, 214 octets out
[pptp0] Bundle up: 0 links, total bandwidth 9600 bps
[pptp0] IPCP: Close event
[pptp0] IPCP: state change Req-Sent --> Closing
[pptp0] IPCP: SendTerminateReq #2
[pptp0] CCP: Close event
[pptp0] CCP: state change Req-Sent --> Closing
[pptp0] CCP: SendTerminateReq #2
[pptp0] IPCP: Down event
[pptp0] IPCP: LayerFinish
[pptp0] No NCPs left. Closing links...
[pptp0] closing link "pptp0"...
[pptp0] IPCP: state change Closing --> Initial
[pptp0] CCP: Down event
[pptp0] CCP: LayerFinish
[pptp0] CCP: state change Closing --> Initial
[pptp0] AUTH: Cleanup
[pptp0] LCP: SendTerminateAck #4
[pptp0] LCP: LayerDown
[pptp0] link: CLOSE event
[pptp0] LCP: Close event
[pptp0] LCP: state change Stopping --> Closing
[pptp0] AUTH: Accounting-Thread was canceled
[pptp0] AUTH: Accounting-Thread started
[pptp0] RADIUS: RadiusAccount for: www (Type: 2)
[pptp0] RADIUS: Termination cause: Peer disconnect, RADIUS: 1
[pptp0] RADIUS: rec'd RAD_ACCOUNTING_RESPONSE for user www
[pptp0] AUTH: Accounting-Thread finished normally
pptp0-0: call cleared by peer
pptp0-0: killing channel
[pptp0] PPTP call terminated
[pptp0] link: DOWN event
[pptp0] LCP: Down event
[pptp0] LCP: LayerFinish
[pptp0] LCP: state change Closing --> Initial
pptp0: closing connection with 192.168.12.5 1164
pptp0: killing connection with 192.168.12.5 1164

Куда копать?

[alive]

Точно такая же проблема. При разных вариациях NAS (mpd with patch, other) удалось добиться логина (это когда NAS=other, и в МПД выключено сжатие), но легче на стало от этого, биллинг ничего не считает. При конфигурации NAS=МПД ошибка "невозможно проверить..." Такое чувство что радиус передает МПД один и тот же адрес клиента и сервера.
Никто не рашал подобную проблему?
MPD v4.3, freeradius v 1.7, abills v 0.36b

[dom]

Точно такая же проблема. При разных вариациях NAS (mpd with patch, other) удалось добиться логина (это когда NAS=other, и в МПД выключено сжатие), но легче на стало от этого, биллинг ничего не считает. При конфигурации NAS=МПД ошибка "невозможно проверить..." Такое чувство что радиус передает МПД один и тот же адрес клиента и сервера.
Никто не рашал подобную проблему?
MPD v4.3, freeradius v 1.7, abills v 0.36b

Было подобное...решилось установкой абилса из CVS-а и тип NAS->mpd4